Radio Shack 15-2146 Owners Manual - Page 8

RADIOSHACK 6-IN-1 EASY SETUP VOICE REMOTE NOTE: Each channel entry must be five characters or fewer. If you press more than five characters, the remote says "Try again" and repeats the prompt for step 3. 4. Press SETUP to save this channel. 5. Repeat steps 3 and 4 for each channel to be stored, up to a total of 10 channels, or press and hold SETUP to return to the programming menu. Press and hold BACK to exit programming. NOTE: The remote automatically saves and exits Favorite Channel Programming after you enter the 10th channel. CLEARING THE FAVORITE CHANNEL LIST If you no longer want to scan favorite channels, or if you want to program a completely new list, you can erase the saved channels. To do so: 1. Press and hold SETUP until you hear the programming menu, then press 2. NOTE: If more than 15 seconds pass between key presses, the remote says "Goodbye" and exits programming. 2. At the prompt, select a Favorite Channel Mode by pressing VCR, DVD, CBL/SAT, or TV. 3. Press and hold SETUP to erase the saved channels and return to the programming menu. Press and hold BACK to exit programming. USING MACROS The RadioShack 6-in-1 Easy Setup Voice Remote includes two Macro Keys, M1, and M2. Each one can be set up to perform a repetitive, time-consuming operation with the press of a single key. You can also program a macro onto any other key, except mode keys, SLEEP, FAV SCAN, SETUP, BACK, or REPEAT. A macro can be used to control a home theater operation, to set a favorite channel, or for other multiple functions you would like to control with one key press. Moreover, each Macro Key can hold up to 15 key presses total. NOTE: Programming a new macro over an existing one will erase the original macro. PROGRAMMING A MACRO To program a macro to perform a sequence of commands: 1. Press and hold SETUP until you hear the programming menu, then press 3. NOTE: If more than 15 seconds pass between key presses, the remote says "Goodbye" and exits programming. 2. At the prompt, press an open Macro Key (e.g.,M1 or M2) or the POWER key. NOTE: If you program a macro onto the POWER key, you must press and hold the POWER key for about 2 seconds to activate the macro. Otherwise, the POWER key will function normally (i.e., turn on the selected device only). 3. At the prompt, enter a series of up to 15 commands. For example, press TV once, then POWER, then enter 0 3 for the TV's channel number. Next, press CBL/SAT once, then POWER, then enter 0 7 1 for the Cable Box's channel number (a total of 9 key presses). This example turns the TV on, sets it to channel 3, turns the cable or satellite box on, then sets it to channel 71. NOTE: If there are more than 15 key presses in the sequence, the LED displays a long flash denoting an error and the remote says "Try again" and returns to the prompt for step 2. 4. To save the macro, press and hold SETUP until the remote says "Success", the LED blinks twice and the remote returns to the programming menu. 5. Press 3 and repeat steps 2 through 4 to program another macro or press and hold BACK to exit programming. CLEARING A MACRO 1. Press and hold SETUP until you hear the programming menu, then press 3. NOTE: If more than 15 seconds pass between key presses, the remote says "Goodbye" and exits programming. 2. At the prompt, press an open Macro Key (e.g.,M1 or M2) or the POWER key. 3. Press and hold SETUP until the remote says "Success", the LED blinks twice and the remote returns to the programming menu. 4. Press 3 and repeat steps 2 and 3 to clear another macro or press and hold BACK to exit programming. SETTING THE SLEEP TIMER The RadioShack 6-in-1 Easy Setup Voice Remote includes a sleep timer that lets you set your devices to be turned off after a specified time, even if the device does not have a sleep function. SETTING THE SLEEP TIMER If you want to set any device to turn off after a specified time: 1. Press a mode key (AUD, CD, TV, VCR, DVD, CBL/ SAT). 8 Using Macros