Reebok 710 Treadmill English Manual - Page 13
yet. Note: The #10 Star Washers are slightly
View all Reebok 710 Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
8. Set the console assembly face down on a soft surface to avoid scratching the console 8 assembly. Remove and discard the two indicated #8 x 3/4" Screws (1). Then, lift off the Crossbar (102). Console Assembly 1 102 9. IMPORTANT: To avoid damaging the Crossbar (102), do not use power tools and 9 do not overtighten the #10 x 3/4" Screws (6). Orient the Crossbar (102) as shown. Attach the Crossbar to the Handrails (76, 77) with four #10 x 3/4" Screws (6) and four #10 Star Washers (12); do not fully tighten the Screws yet. Note: The #10 Star Washers are slightly smaller than the 1/4" Star Washers (not shown). 102 6 12 76 6 12 77 13
13
8.
Set the console assembly face down on a
soft surface to avoid scratching the console
assembly.
Remove and discard the two indicated #8 x 3/4"
Screws (1). Then, lift off the Crossbar (102).
8
102
Console
Assembly
1
9.
IMPORTANT: To avoid damaging the
Crossbar (102), do not use power tools and
do not overtighten the #10 x 3/4" Screws (6).
Orient the Crossbar (102) as shown. Attach
the Crossbar to the Handrails (76, 77) with
four #10 x 3/4" Screws (6) and four #10 Star
Washers (12);
do not fully tighten the Screws
yet. Note: The #10 Star Washers are slightly
smaller than the 1/4" Star Washers (not
shown).
9
102
76
77
12
12
6
6