Ricoh IM 5000 User Guide - Page 289

When Other Messages Appear When Other Messages Appear • When confirming or changing the settings in [Settings], press [Home] ( ) after closing [Settings]. Message Cause Solution and reference "Administrator Authentication for User Management must be set to on before this selection can be made." The User Management privilege is disabled in the administrator authentication management. When specifying Basic, Windows, or LDAP authentication, configure the User Management privilege in [Settings] [System Settings] [Settings for Administrator] [Authentication/ Charge] [Administrator Authentication/User Authentication/App Auth.] [Administrator Authentication Management]. See "Registering Administrators Before Using the Machine", User Guide (Full Version). "Destination list / machine settings are updated. Selected destinations or function settings have been cleared. Please re-select the settings." A destination is being registered and devices are being configured using Web Image Monitor. Wait until the message disappears and do not turn off the power of the machine. You may not be able to perform operations for a while depending on the number of destinations being registered. "Failed to read the PDF file." The user attempted to display a PDF file that is not supported by the Web browser of the machine. The Web browser of the machine supports the PDF versions and encryption levels shown below. Other PDF files cannot be displayed. • PDF version: 1.3-1.7 • PDF encryption level: 128-bit AES, 256-bit AES "Firmware update will start. Press [OK]. It will start automatically after 30 seconds." A firmware update is available, and the machine is about to perform an update. It is recommended to apply the update, but you can stop the updating process by pressing [Stop] within 30 seconds after the message is displayed. Do not turn off the power of the machine while the updating process is in progress. 287