Samsung DMT400RHS Installation Guide Ver.1.0 (English, French, Spanish) - Page 20

Wiring Connections

Get Samsung DMT400RHS PDF manuals and user guides
UPC - 036725593985
View all Samsung DMT400RHS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

installing the dishwasher STEP 11 WIRING CONNECTIONS 1. Before connecting the power cable to the dishwasher, make sure the circuit breaker is off. 2. In the junction box located at the front bottom right of the dishwasher, find the three power wires from the dishwasher including the grounding line. 3. Pass the power cable through the strain relief, and then into the junction box (Figure 13). 4. Connect the black wire of the dishwasher to the black wire of the power cable by insertng both into a wire nut. and then rotating the wire connector as shown in Figure 14. Connect the white wire to the white wire and the green to the green in the same manner. 5. Recheck each wire to ensure it is connected correctly and securely. Each colored wire should be connected to the corresponding wire of the same color. White should be connected to white, black to black, and green to green. 6. Replace the junction box cover on the dishwasher. Power cable Junction box Strain relief Black to black White to white Green to green (Ground to ground) 20_ installing the dishwasher installation_DD68-00046A-06_EN_130401.indd Sec3:20 2013-04-01 5:05:25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
20_
installing the dishwasher
installing the dishwasher
STEP 11
WIRING CONNECTIONS
1.
Before connecting the power cable to the dishwasher, make sure the circuit breaker is off.
2.
In the junction box located at the front bottom right of the dishwasher, find the three power
wires from the dishwasher including the grounding line.
3.
Pass the power cable through the strain relief, and then into the junction box (Figure 13).
4.
Connect the black wire of the dishwasher to the black wire of the power cable by insertng
both into a wire nut. and then rotating the wire connector as shown in Figure 14.
Connect the white wire to the white wire and the green to the green in the same manner.
5.
Recheck each wire to ensure it is connected correctly and securely.
Each colored wire should be connected to the corresponding wire of the same color.
White should be connected to white, black to black, and green to green.
6.
Replace the junction box cover on the dishwasher.
<Figure 13>
<Figure 14>
Black to black
White to white
Green to green
(Ground to ground)
Power cable
Junction box
Strain relief
installation_DD68-00046A-06_EN_130401.indd Sec3:20
installation_DD68-00046A-06_EN_130401.indd
Sec3:20
2013-04-01
5:05:25
2013-04-01
5:05:25