Samsung DV431AEP/XAA User Manual (user Manual) (ver.1.0) (English) - Page 33
PROBLEM, SOLUTION, after Refresh. - how to steam clothes
View all Samsung DV431AEP/XAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
05 troubleshooting PROBLEM SOLUTION Shuts off before load is dry • Dryer load is too small. Add more items or a few towels and restart the cycle. • Dryer load is too large. Remove some items and restart the dryer. Lint on clothes • Make sure the lint filter is cleaned before every load. With some loads that produce high amounts of lint, it may be necessary to clean the filter during the cycle. • Some fabrics are lint producers (for example, a fuzzy white cotton towel)and they should be dried separately from clothes that are lint trappers(for example, a pair of black linen pants) • Divide larger loads into smaller loads for drying • Check pockets thoroughly before washing and drying clothes. Garments still wrinkled after • Small loads of 1 to 4 items work best. Wrinkle-Care • Load fewer garments.Load similar-type garments. Odors remain in clothing after Refresh. • Fabrics containing strong odors should be washed in a normal cycle. Water drips from nozzle when Steam-Care starts • This is steam condensation. The dripping water will stop after a short time. Sprayed water is not visible • Sprayed water is difficult to see when the door is closed during Steam-Care DV431AEP-03021A-01_EN.indd Sec12:33 troubleshooting _33 2011-01-26 3:47:26