Samsung HCM653W User Manual (user Manual) (ver.1.0) (English) - Page 11

YOUR NEW TV Rear Panel Jacks Use the rear panel jacks to connect an A/V component that will be connected continuously, such as a VCR or a DVD player. Because there are two sets of input jacks, you can connect two different A/V components (i.e., a VCR and a DVD, 2 VCRs, etc.) For more information on connecting equipment, see pages 2.1 - 2.8. Œ ANTENNA terminals Two independent cables or antennas can be connected to these terminals. Use ANT-A and ANT-B terminals to receive a signal from VHF/UHF antennas or your cable system. Use the ANT-A OUT terminal to send the signal being received by the ANT-A terminal out to another component (such as a Cable Set Top Box). The PIP channel can be received only when a signal source is connected to ANT-A. ´ S-VIDEO INPUT jack Connect to an S-VHS VCR or DVD player. ˇ VIDEO INPUT jacks Connect to the video output jacks of VCRs, DVD players and similar devices (Two sets are available: Video1 and Video2). ¨ AUDIO INPUT jacks Connect to the audio output jacks of VCRs, DVD players and similar devices. ˆ AUDIO-VIDEO MONITOR OUTPUT jacks Connect to the audio/video input jacks of a recording VCR. Note: The monitor out does not operate in DVD or DTV mode. Ø COMPONENT 1(480i, 480p) INPUT jacks Connect a source that outputs 480i/480p Y,PB and PR signals, such as a DVD Player. ∏ COMPONENT 2(480p, 1080i) INPUT jacks Connect a source that outputs 480p/1080i Y,PB and PR signals, such as a DTV Set-Top Box. " SURROUND OUT (HCL552W/HCL652W/HCL473W/ HCM553W/HCM653W only) Connects to a (optional) rear-surround amp: Surround Left, Surround Right and Center. 1.4 CHAPTER ONE: YOUR NEW TV