Samsung HCM653W User Manual (user Manual) (ver.1.0) (English) - Page 21
Connecting a DTV Set-Top Box 480p, 1080i, Connecting Surround Speakers
View all Samsung HCM653W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
I N S TA L L AT I O N Connecting a DTV Set-Top Box (480p, 1080i) When switching to the DTV mode, either 480p or 1080i format is automatically selected according to the input signal. Note: Only 480p and 1080i formats are supported. 1 Connect a set of audio cables between the DTV Set-Top Box audio in jacks on the TV and the AUDIO OUT jacks on the DTV Set-Top box. 2 To enable Component video viewing, connect video cables between the Y, PB, and PR inputs on the TV and Y, PB, and PR (or Y, CB, CR) outputs on the DTV Set-Top box. Note: For an explanation of Component video, see your DTV Settop box's owner's instruction. Connecting Surround Speakers (HCL552W/HCL652W/HCL473W/HCM553W/HCM653W only) 1 Connect inputs of an amplifier to the SURROUND OUT outputs of the TV. Then connect the surround speakers to your amp. Note: This figure shows the Standard Connector-jack panel. The actual configuration on your TV may be different, depending on the model. 2.8 CHAPTER TWO: INSTALLATION