Samsung HCM653W User Manual (user Manual) (ver.1.0) (English) - Page 27

Adjust Red Convergence

Get Samsung HCM653W PDF manuals and user guides View all Samsung HCM653W manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

OPERATION Adjust Red Convergence 4 While "Red" is highlighted, press the joystick to enter: A crosshair pattern will appear on the screen. Move the joystick up/down/left/right to select where to adjust Convergence. 5 If a horizontal red line is visible, use CH and CH buttons to move the line so that it is superimposed on the horizontal center-line (i.e., make a single horizontal line that is as white as possible.) 6 If a vertical red line is visible, use the VOL + and VOL - buttons to move the line so that it is superimposed on the vertical-center line (i.e., make a single vertical line that is as white as possible.) 7 For 'Blue' adjustment, do the same as the above. After the red convergence is correctly adjusted, press Menu to exit all the menus. Note: Since the center convergence adjustments can't be done after completing the side convergence adjustments, do the center convergence adjustments first. If you have done the side convergence adjustments first, then end the Convergence Adjustments by pressing the Menu button, Then re-start from No. 3 on page 3.4 to adjust the center convergence. 3.5 CHAPTER THREE: TV OPERATION

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
C
HAPTER
T
HREE
: TV O
PERATION
3
.5
O
PERATION
4
While “Red” is highlighted, press the
joystick to enter:
A crosshair pat-
tern will appear on the screen.
Move the joystick up/down/left/right
to select where to adjust
Convergence.
5
If a horizontal red line is visible, use
CH
and
CH
buttons to move
the line so that it is superimposed on
the horizontal center-line (i.e., make
a single horizontal line that is as
white as possible.)
6
If a vertical red line is visible, use
the
VOL +
and
VOL -
buttons to
move the line so that it is superim-
posed on the vertical-center line
(i.e., make a single vertical line that
is as white as possible.)
Adjust Red Convergence
7
For ‘Blue’ adjustment, do the same as the above.
After the red convergence is correctly adjusted, press
Menu
to exit
all the menus.
Note: Since the center convergence adjustments can’t be done after
completing the side convergence adjustments, do the center conver-
gence adjustments first. If you have done the side convergence
adjustments first, then end the Convergence Adjustments by press-
ing the Menu button, Then re-start from No. 3 on page 3.4 to adjust
the center convergence.