Samsung HG40NC678DF User Manual Ver.1.0 (English) - Page 22

Menu Security DRM System Item Password Input Password Setting Password Reset Security Mode USB HDMI DRM Mode PI AES Data PI AES Log View PI AES Log Self Diagnosis for TV Self Diagnosis for HTV SW Upgrade initial Value Pro:idiom 0xD279 OFF ... Description Input Password 00000000.(HC678 model none) Set new Password.(HC678 model none) Reset Password to 00000000.(HC678 model none) Security Mode ON or OFF.(HC678 model none) USB Disable or Enable.(HC678 model none) HDMI Disable or Enable.(HC678 model none) Configures CAS support. Applies to only the NB673, NB677, and NB678 models. OFF : Turns off CAS support. LYNK DRM : Select to turn on S-LYNK DRM CAS support only. Pro:idiom : Select to turn on Pro:Idim CAS support only. LYNK DRM,PI : Select to have the TV support S-LYNK DRM CAS and Pro:Idiom CAS. Displays the current state of Pro:Idion AES PI AES Log consists of Pro:Idiom AES diagnostic register, here after referred as AESD, values. These register log will help us diagnose PI key loss issue in the field and provide solution for it. Displays Pro:Idion AES Log OSD Lets you check the state of the TV picture and sound. • Picture Test : Use to check for picture problems. If the problem appears in the test picture, select YES, and then follow the directions on the screen. • Sound Test : Use to check for sound problems. If the problem occurs during the test, select YES, and then follow the directions on the screen. Lets you check the state of Pro:Idiom and its communication with the SI STB or SBB. If you have any problems with the Pro:idiom encryption channel or the communications with the SI STB or SBB, use this diagnosis function. If Pro:Idiom DTV Channel Key Loss appears to have failed and the Pro:Idim encryption channel has failed to play content, first check the broadcasting systems related to Pro:Idiom encryption. If your broadcasting system does not have a problem, contact Samsung Service. If STB SI Vendor Setting appears to have failed and communication with the SI STB or SBB has failed, first check your SI STB or SBB. If your SI STB or SBB does not have a problem, contact to Samsung Service. Lets you upgrade the TV SW with a USB memory stick. See Page 32. Service Pattern OFF Lets you check the state of the TV picture by displaying picture test patterns. Press the Menu button to turn off the test patterns and exit. ATV Cable AGC Gain Default Lets you control the AGC gain of the analog cable channels. Don't change the default value unless problems occur. DTV OpenCable AGC Gain Default Lets you control the AGC gain of the digital cable channels. Don't change the default value unless problems occur. Sound Bar Out ON: TV speaker sound will be mute. Sound will come out through HDMI. OFF You must connect the Sound Bar to hear the sound. OFF: Sound will come out through TV speakers normally. Contact Samsung Samsung Contact information TV reset Returns all settings on the TV to their factory defaults. ✎✎REACH (Remote Enhanced Active Control for Hospitality) is a professional, interactive remote controller that lets you deliver TV firmware updates, cloning data, channel mapping changes, S-LYNK REACH contents, and TICKER contents through RF DTV to several hundred hospitality TVs simultaneously. The REACH functions are available only in stand- alone mode. The REACH Server is sold separately. Refer to the REACH server manual enclosed with the REACH server product for more operating information. 22 English [HC670_677_678-ZA]Install Guide-X0ENG.indd 22 2014-03-17 10:02:27