Samsung HL-T5689S User Manual (ENGLISH) - Page 82

Setting Up Anynet+ The following settings are to use Anynet+ functions. To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On 1 Press the MENU button. Press the ▲ or ▼ button to select Setup, then press the ENTER button. 2 Press the ▲ or ▼ button to select Anynet+ (HDMI-CEC), then press the ENTER button. Setup Melody Bluetooth : Medium Anynet+ (HDMI-CEC) ▶ SW Upgrade Function Help : On 3 Press the ENTER button to select Anynet+ (HDMI-CEC), then press the ENTER button. 4 Press the ▲ or ▼ button to select On, then press the ENTER button. ➢ The Anynet+ function is enabled. ➢ If you select Off, Anynet+ is disabled. ➢ When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated. Anynet+ (HDMI-CEC) Setup Anynet+ (HDMI-CEC) : OONff Auto Turn Off : On Move Enter Return Setting an Anynet+ Device to turn Off Automatically when the TV is Turned Off 3 Press the ▲ or ▼ button to select Auto Turn Off, then press the ENTER button. 4 Press the ▲ or ▼ button to select On, then press the ENTER button. ➢ The Auto turn off function is enabled. ➢ If you select Off, the Auto turn off function is canceled. Press the EXIT button to exit. Anynet+ (HDMI-CEC) Setup Anynet+ (HDMI-CEC) : On Auto Turn Off : Off On Move Enter Return ➢ The Select Device setting of the TV remote control is to be set to TV to use the Anynet+ function. ➢ If you set the Anynet+ (HDMI-CEC) to On, the Device List menu appears when you press the TOOLS button on the remote control. ➢ If you set Auto Turn Off to On, connected external devices are also turned off when the TV is turned off. However, if the device is recording, it may not be turned off. Scanning and Switching between Anynet+ Devices 1 Press the Anynet+ button. Press the ENTER button to select Device List.









Device List ➢ Anynet+ devices connected with the TV are listed. ➢ If you cannot find a device you want, press the red button to scan for devices.



Headset Connection Picture Setting Sound Setting 2 Press the ▲ or ▼ button to select to a particular device and press the ENTER button. Sleep Timer Off It is switched to the selected device. Caption Off ➢ Only when you set Anynet+ (HDMI-CEC) to On in the Setup menu, the Device List menu Channel Add/Delete Delete Favorite Channel appears. ▼ ➢ Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation Move Enter during the switching operation. ➢ The time required to scan for devices is determined by the number of connected devices. ➢ When the device scan is complete, the number of found devices is not displayed. ➢ Although the TV automatically scans devices when it is turned on using the POWER button, devices connected when the TV is already on are not displayed in the device list. Therefore press the red button to re-scan devices if necessary. ➢ If you have selected external AV device by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the Anynet+ button. English - 82 Continued...