Samsung HMX-H300BN User Manual (user Manual) (ver.1.0) (English) - Page 91
Demo, Anynet+ (HDMI-CEC), Enables the Demo function.
UPC - 036725303836
View all Samsung HMX-H300BN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Demo Demo mode automatically shows you the major functions that are included with your camcorder so that you may use them more easily. 1. Touch the Menu ( ) Setting ( ) tab "Demo." 2. Touch the desired submenu item. 3. To exit the menu, touch the Exit ( ) or Return ( ) tab. Demo Off On 1/1 Submenu items • Off: Disable the Demo function. • On: Enables the Demo function. Using the Demo function You can easily operate demo function touching Menu ( ) tab for 5 seconds. The Demo mode is canceled in the following cases: - If the LCD screen is touched. - If you press any button (Recording start/stop, Anti-shake (OIS), Display ( ), SMART AUTO, MODE, PHOTO, etc.). However, the camcorder enters the Demo mode automatically after 5 minutes in STBY mode if it is idle for 5 minutes without an operation. If you don't want the Demo function to start, set "Demo" to "Off." The Demo function does not operate in the following case: - If you set "Auto Power Off" to "5 Min" and you are using the battery to power the camcorder, the Auto Power Off function turns the camcorder off before Demo can run. System setting Anynet+ (HDMI-CEC) This camcorder supports Anynet+. Anynet+ is an AV network system that lets you control all connected Samsung AV devices with an Anynet+ supported Samsung TV remote control. 1. Touch the Menu ( ) Setting ( ) tab "Anynet+ (HDMICEC)." 2. Touch the desired submenu item. Anynet+ (HDMI-CEC) Off On 1/1 3. To exit the menu, touch the Exit ( ) or Return ( ) tab. Submenu items • Off: Disables the function. • On: The Anynet+ function is enabled. When the camcorder is connected to an Anynet+ supported TV, you can operate some functions of the camcorder using the TV's remote control. • When you turn on the camcorder and it is connected by an HDMI cable to a TV that supports Anynet+, the TV automatically turns on. If you do not want to use the Anynet+ function, set the "Anynet+ (HDMI-CEC)" to "Off." • For details on the Anynet+ (HDMI-CEC) function, refer to the user manual of Samsung's Anynet+ supported TV. 87