Samsung ME19R7041F Installation Guide - Page 7

TOOLS YOU WILL NEED General information #1 and #2 Phillips screwdriver Pencil Ruler or tape measure and Carpenter square (optional) straight edge Tin snips (for cutting damper, if required) Scissors (to cut template, if necessary) Electric drill with 3/16˝, ½˝ and ⅝˝ drill bits Filler blocks or scrap wood pieces, if needed for top cabinet spacing (used on recessed bottom cabinet installations only) Gloves Saw (saber, hole or keyhole) Stud finder or Hammer (optional) Safety goggles Level Duct and masking tape MOUNTING SPACE 12˝ max. 16 30˝ 5˝ 30˝ min. Bottom edge of the cabinet needs to be 30˝ or more from the cooking surface. Backsplash NOTES: • The space between the cabinets must be 30˝ wide and free of obstructions. • This microwave oven is for installation over ranges up to 36˝ wide. • If you are going to vent your microwave oven to the outside, see the Hood Exhaust Section for exhaust duct preparation. • If installing the microwave oven beneath smooth flat cabinets, be careful to follow the instructions on the top cabinet template for power cord clearance. • Maximum cabinet depth above and beside the unit is 12˝. • The dimensions provided are the minimum required for mounting the microwave oven. Local codes and the practical use of the range will likely require you to provide more than the 13.5˝ shown between the range and the bottom of the microwave. 7 ME4000R_ME19R7041FS_AA_DE68-04585A-01_EN.indd 7 2021-03-25 오전 11:43:18