Samsung MultiXpress SCX-8120 User Manual Ver.1.03 (English) - Page 125
Troubleshooting, Redistributing toner
View all Samsung MultiXpress SCX-8120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Troubleshooting 11. This chapter gives helpful information for what to do if you encounter an error. This chapter includes: • Redistributing toner • Replacing the toner cartridge • Cleaning paper dust stick and chargers of imaging units • Replacing the imaging unit • Replacing the waste toner container • Clearing original document jams • Tips for avoiding paper jams • Clearing paper jams • Understanding display messages • Solving other problems If you cannot solve problems using this chapter, contact your administrator or service center. You can see the contact information from Machine Setup > Others > Contact Information. This information is configured by the machine's administrator. 2. Pull the corresponding toner cartridge out from the machine. CLX-92x1 / 93x1 Series SCX-812x Series Redistributing toner When the toner cartridge is near the end of its life: • White streaks or light printing occurs. • Toner low related message appears on the display. • The status LED blinks red. If this happens, you can temporarily improve print quality by redistributing the remaining toner in the cartridge. In some cases, white streaks or light printing will still occur even after you have redistributed the toner. Click this link to open an animation about redistributing toner. 1. Open the front door. CLX-92x1 / 93x1 Series SCX-812x Series 1 2 1 2 3. Thoroughly shake the cartridge five or six times to distribute the toner evenly inside the cartridge. CLX-92x1 / 93x1 Series SCX-812x Series Toner particles can be released inside the machine but it does not mean the machine is damaged. Contact a service representative when print quality problems occur. If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric. Troubleshooting_ 125