Samsung NE63T8711SG/AA User Manual - Page 49
Care and cleaning of the oven, Shake the bottle of Stainless Steel Appliance Cleaner or Polish well.
View all Samsung NE63T8711SG/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Maintaining your appliance Care and cleaning of the oven WARNING • Be sure all controls are OFF and all surfaces are COOL before cleaning any part of the range. • If your range is moved for cleaning, servicing, or any reason, be sure the Anti-Tip device is re-engaged properly when the range is replaced. If you fail to reengage the Anti-Tip device, the range could tip and cause serious injury. Vent • The cooling vents are located at the Vent back of the oven range. • This area could become hot during oven use. • It is normal for steam to come out of the vent. • The vent is important for proper air circulation. Never block this vent. Cleaning painted parts and decorative trim • For general cleaning, use a cloth with hot, soapy water. • For more difficult residue and built-up grease, apply a liquid detergent directly onto the area and leave for 30 to 60 minutes. Wipe with a damp cloth and dry. Do not use abrasive cleaners on any of these surfaces. They can scratch. Cleaning stainless steel surfaces 1. Shake the bottle of Stainless Steel Appliance Cleaner or Polish well. 2. Place a small amount of stainless steel appliance cleaner or polish on a damp cloth or damp paper towel. 3. Clean a small area, rubbing with the grain of the stainless steel if applicable. 4. Dry and buff with a clean, dry paper towel or soft cloth. 5. Repeat as necessary. NOTE • Do not use a steel-wool pad. It will scratch the surface. • If a mineral oil-based stainless steel appliance cleaner has been used before to clean the appliance, wash the surface with dishwashing liquid and water prior to using the Stainless Steel Appliance Cleaner or Polish. Oven racks • If the racks are left in the oven during a self-cleaning cycle, their color will turn slightly blue and the finish will be dull. After the self-cleaning cycle is complete and the oven has cooled, rub the sides of the racks with wax paper or a cloth containing a small amount of oil. This will help the racks glide more easily on their tracks. • Gliding racks may be cleaned by hand with an abrasive cleaner or steel wool. During cleaning, be careful not to allow water or cleaner to enter the slides on the sides of rack. NOTE • Do not clean in a dishwasher. • If the rack becomes hard to remove or replace, lightly wipe the oven rack guides with cooking oil. Do not wipe cooking oil on the slides. • If the rack becomes difficult to slide, the rack may need to be lubricated using a graphite lubricant. NE63T8711_AA_DG68-01209A-00_EN.indd 49 English 49 3/27/2020 12:44:12 PM