Samsung NX58R9311SS/AA User Manual - Page 33
Replacing the oven light, English 33, After self-cleaning, Oven light
View all Samsung NX58R9311SS/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
After self-cleaning • The door stays locked until the internal oven temperature falls below 400 °F. • When the oven has cooled down, wipe the oven surfaces with a cloth to remove ash residue. • Stubborn stains can be removed using a steel-wool pad. Lime deposits can be removed using a vinegar-soaking cloth. • If you are not satisfied with the cleaning results, repeat the cycle. "HOT" appears on the display until the oven cools down. Wait until the message disappears, and then start a new cycle. • The cooling fan automatically runs for certain amount of time after self-cleaning. • After a self cleaning cycle finishes, you cannot run another self-cleaning cycle for 2 hours. CAUTION Do not attempt to open the oven door immediately after the self-cleaning cycle is complete. The oven is still very hot when the door unlocks. Escaping hot air and/or steam could burn you. Replacing the oven light Oven light The oven light is a standard 40-watt appliance bulb. It comes on when you open the oven door. 1. Turn off the oven. 2. Make sure the oven and oven light are cool. 3. Open the door, and remove the glass cover by turning it counterclockwise. Remove Replace 4. Remove the oven light from the socket by turning it counterclockwise. 5. Insert a new 40-watt appliance bulb into the socket, and then turn it clockwise to Glass bulb cover Bulb tighten. 6. Reinsert the glass cover, and then turn it clockwise to tighten. CAUTION To prevent electric shock, make sure the oven is turned off and cool before replacing the oven light. NOTE • The oven light does not operate during the self-cleaning cycle. • Remove the racks if they prevent you from accessing the oven light. Maintenance NX58R9311SS_AA_DG68-00905B-00_EN+MES+CFR.indb 33 English 33 2019-05-30 6:11:14