Samsung NX58R9311SS/AA User Manual - Page 35
Locked position, English 35, How to re-install the door
View all Samsung NX58R9311SS/AA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
How to re-install the door 1. Firmly grasp both sides of the door at the top. 2. With the door at the same angle as the removal position, slide the indentations of the hinge arms into the bottom edges of the hinge slots. The notches in each hinge arm must be fully inserted into the bottoms of each slot. Bottom edge of slot Hinge arm Indentation 3. Open the door fully. If the door will not open fully, the indentations are not inserted correctly in the bottom edges of each slot. 4. Push the hinge locks up against the front frame of the oven cavity into the locked position. Hinge lock How to remove and re-install the Storage drawer Storage drawer 1. Pull out the drawer and remove any stored content. 2. While supporting the drawer, pull it out until the top of the drawer sides come out of the two nylon drawer guides. Then, lift to remove the drawer. 3. Clean the drawer with warm, soapy water. Rinse and dry thoroughly. 4. Place the top of both drawer sides in the openings on the two nylon drawer guides and push in enough to support the drawer. 5. Replace any stored content, and then push in the drawer while slightly lifting the front to close it. Maintenance 5. Close the oven door. Locked position Unlocked position NX58R9311SS_AA_DG68-00905B-00_EN+MES+CFR.indb 35 English 35 2019-05-30 6:11:15