Samsung PS50A410C1 User Manual - Page 36
Listening through a Receiver, Check Points before Requesting Service
View all Samsung PS50A410C1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Listening through a Receiver You can listen to sound through a receiver instead of the TV speaker. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Input, then press the ENTER button. TV P 1 View TV 2 Press the ▲ or ▼ button to select Anynet+ (HDMI-CEC), then press the ENTER button. Select Device Record 3 Press the ▲ or ▼ button to select Receiver, then press the ENTER button. Press the ◄ or ► button to select to On, then press the ENTER button. Menu on Device Device Operation Now you can listen to sound through the receiver. Receiver :On 4 Press the EXIT button to exit. ➢ When the receiver is set to On, you can listen to the TV sound through the 2-channel receiver. Setup Move Return Enter ➢ If the receiver is exclusively for a home theater only (supporting audio only), it may not appear in the device list. ➢ In case of a content with copyright problem, listening through the receiver may not properly operate. ➢ When listening through the receiver, there are restrictions for using the PIP and audio-related menu. Check Points before Requesting Service Symptom Anynet+ does not work. I want to start Anynet+. I want to exit Anynet+. The Connecting to Anynet+ device... message appears on the screen. The Anynet+ device does not play. The connected device is not displayed. The TV program cannot be recorded. Solution ■ Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. ■ Connect only one receiver. ■ Check if the Anynet+ device power cord is properly connected. ■ Check the Anynet+ device's Video/Audio/HDMI Cable connections. ■ Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. ■ Check whether the TV remote control is in TV mode. ■ Check whether it is Anynet+ exclusive remote control. ■ Anynet+ doesn't work at a certain condition. (Searching channels) ■ When connecting or removing the HDMI cable, please make sure to search devices again or restart your TV. ■ Check if the Anynet+ Function of Anynet+ device is set on. ■ Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu. ■ Press the TV button on the TV remote control to switch to TV. Then press the TOOLS button to show the Anynet+ menu and select a menu you want. ■ Select View TV in Anynet+ menu. ■ Press the SOURCE button on the TV remote control and select a device other than Anynet+ devices. ■ Press any of P, CH LIST, PRE-CH, and such to change to the TV mode. (Note that the channel button operates only when a tuner-embedded Anynet+ device is not connected.) ■ You cannot use the remote control when you are configuring Anynet+ or switching to a view mode. ■ Use the remote control when the Anynet+ setting or switching to view mode is complete. You cannot use the play function when an auto channel scan is in progress. Stop the currently running function. ■ Check whether or not the device supports Anynet+ functions. ■ Check whether or not the HDMI Cable is properly connected. ■ Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu. ■ Search Anynet+ devices again. ■ You can connect an Anynet+ device using the HDMI Cable only. Some HDMI cables may not support Anynet+ functions. Check whether the antenna jack on the recording device is properly connected. English - 36