Samsung RB215BSSB Service Manual - Page 67
When PANEL PCB Buttons do not work, When F &R Room Lamps do not light up - freezer problems
View all Samsung RB215BSSB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Diagnostics 2) When PANEL PCB Buttons do not work Start Is Connector of Upper Hinge Cover inserted well? YES Is insertion of MAIN PCB Connector (CN50) normal? YES Is insertion of PANEL PCB Connector normal? YES Is there any of 6 buttons pressed? YES Is CHILD LOCK BUTTON pressed? YES Recheck/Change MAIN PCB ASS'Y NO Re-insert Connector, NO Check contacts Re-insert MAIN PCB Connector, Check contacts NO Re-insert PANEL PCB Connector, Check contacts NO Re-assemble PANEL PCB YES COVER Release CHILD LOCK 13-8) When Room Lamp does not light up(F &R Rooms are the same) 1) When F &R Room Lamps do not light up Pre-Check - Room Lamp(F,R) 1. Check F-Room Lamp ON after opening Freezer Door. 2. Check F-Room Lamp OFF by pushing Door S/W. 3. Check R-Room with using the same method �,� after closing Freezer Door. 4. When it's problems, check Room Lamp and Door S/W (Refer to Door S/W sensor circuit) 5. Check the electric wire connect status. 67