Samsung RS257BABB Service Guide - Page 49

If Ding-Dong sounds continuously, Start, If Ding-Dong sounds continuously

Page 49 highlights

Diagnostics 11-5) If alarm sound 1) If "Ding-Dong" sounds continuously Start Yes Isn't the door opened minutely? � Freezer door MICOM No. 60, Fridge door MICOM No. 54 - Regular voltage are 5V to Open : 0V to Close. � Separate the door S/W and check if the measured value of unit is changed from 0 to∞Ϊ according to S/W ON/OFF. No slightly NO Isn't water penetrated into the door S/W? YES Is the input voltage of NO main No. 60 and 54 changed at door-open, door-close? YES NO Is the state of inserted connector (CN30)being normal? YES NO Is the door S/W self-unit normal? Remove causes after comprehending the conditions of interference by door gasket, food etc. Exchange the door S/W. Troubleshoot the breaking of wire and bad door S/W. Connector not inserted. Troubleshoot poor contact. YES Main PCB and door S/W are normal. Exchange the door S/W. 2) If "Ding-Dong" sounds continuously Start Didn't you select Forced operation and Forced Defrosting? YES Do buzzer still sound after power-on again? Selected Release the Forced operation and Forced Defrosting functions, or turn NO ON again after power OFF. YES Check if there is any short parts due to foreign matters and the test jumper part in the main-PCB. Main-PCB is normal 49

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66

49
²
Freezer door MICOM No. 60,
Fridge door MICOM No. 54
– Regular voltage are 5V to Open :
0V to Close.
²
Separate the door S/W and
check if the measured value of
unit is changed from
0 to
∞Ϊ
according to S/W ON/OFF.
1) If “Ding-Dong” sounds continuously
Isn’t the door opened minutely?
Start
Remove causes after
comprehending the conditions of
interference by door gasket, food etc.
Isn’t water penetrated
into the door S/W?
Exchange the door S/W.
Is the input voltage of
main No. 60 and 54 changed at door-open,
door-close?
Troubleshoot the breaking of wire and
bad door S/W.
Main PCB and door S/W are normal.
Yes
NO
No slightly
YES
NO
Connector not inserted. Troubleshoot
poor contact.
NO
Exchange the door S/W.
NO
YES
Is the state of inserted connector
(CN30)being
normal?
YES
Is the door S/W self-unit normal?
YES
2) If “Ding-Dong” sounds continuously
Didn’t you
select Forced operation and Forced
Defrosting?
Start
Release the Forced operation and
Forced Defrosting functions, or turn
ON again after power OFF.
Do buzzer
still sound after power-on
again?
Main-PCB is normal
Check if there is any short parts due to
foreign matters and the test
jumper part in the main-PCB.
Selected
NO
YES
YES
Diagnostics
11-5) If alarm sound