Samsung RS25H5000SR User Manual Ver.00 (English) - Page 12
Separating the water supply line from, the refrigerator, Reattaching the Water Supply Line, Removing
View all Samsung RS25H5000SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Separating the water supply line from the refrigerator 1. Remove two water lines by pressing the coupler ( 1 ) and pulling the water line ( 2 ) away. Removing the freezer door A few things to mention first. • Make sure that you lift the door straight up so the hinges are not bent or broken. • Be careful not to pinch the water tubing and wire harness on the door. • Place doors on a protected surface to prevent scratching or damage. • Is necesary two people for disassembling doors. (1) 1. With the Freezer door closed, remove the upper hinge cover ( 1 ) using a screwdriver, and (2) then disconnect the wires ( 2 ). CAUTION Make sure the color of the water lines match. Reattaching the Water Supply Line 1. The Water Line must be fully Inserted to the center of transparent coupler to prevent water leakage from the dispenser. 2. Insert the 2 clips in the install pack and check that each clip holds the line firmly. Center of Transparent coupler (1) (2) Be careful, no damage sensor harness with cover hinge. 2. Remove hinge bolts ( 3 ) with a 10 mm Socket Wrench and a ground screw ( 4 ) counterclockwise, and take off the upper hinge ( 5 ) in the direction of the arrow. Be careful when removing the door to ensure that it does not fall on you. Clip A (1/4") (6.35 mm) (4) Pressing (3) (5) Do not cut the water line. Gently separate it from the coupler. SSEDA-14 (RS25H5121) ���.indd 12 English - 12 2013. 11. 28. �� 11:28