Samsung RS25H5000SR User Manual Ver.00 (English) - Page 13

Reattaching the freezer doors, Removing the fridge door - parts

Page 13 highlights

01 setting up 3. Before remove the bolts, disassembling Cover Leg front and hoses. Open the Freezer door before lifting it up. Remove the door from the lower hinge ( 6 ) by carefully lifting the door ( 7 ). (7) Reattaching the freezer doors CAUTION To reattach the freezer doors, replace parts in reverse order. (6) 4. Remove the lower hinge ( 8 ) from the lower hinge bracket ( 9 ) by lifting the lower hinge in the direction of the arrow. SETTING UP THE REFRIGERATOR (CONT'D) Removing the fridge door 1. With the door closed, remove the upper hinge cover ( 1 ) using a screwdriver. (1) (8) (9) CAUTION Make sure to put the water line through the lower hinge before assembling it. 2. Remove hinge bolts ( 2 ) with a 10 mm Socket Wrench and ground screw ( 3 ) counterclockwise, and take off the upper hinge ( 4 ) in the direction of the arrow. Be careful when removing the door to ensure that it does not fall on you. (3) (2) (4) CAUTION Do not remove the sensor assembled in the right upper hinge cover. SSEDA-14 (RS25H5121) ���.indd 13 English - 13 2013. 11. 28. �� 11:28

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

English - 13
01 SETTING UP
3. Before remove the bolts, disassembling Cover
Leg front and hoses.
Open the Freezer door before lifting it up.
Remove the door from the lower hinge ( 
) by
carefully lifting the door ( 
7
 ).
(7)
(6)
4. Remove the lower hinge ( 
8
 ) from the lower
hinge bracket ( 
9
 ) by lifting the lower hinge in
the direction of the arrow.
(8)
(9)
CAUTION
Make sure to put the water line through the lower
hinge before assembling it.
Reattaching the freezer doors
CAUTION
To reattach the freezer doors, replace parts in
reverse order.
SETTING UP THE REFRIGERATOR
(CONT’D)
Removing the fridge door
1. With the door closed, remove the upper hinge
cover ( 
1
 ) using a screwdriver.
(1)
2. Remove hinge bolts ( 
2
 ) with a 10 mm Socket
Wrench and ground screw ( 
3
 ) counter-
clockwise, and take off the upper hinge ( 
4
 ) in
the direction of the arrow.
Be careful when removing the door to ensure
that it does not fall on you.
(3)
(2)
(4)
CAUTION
Do not remove the sensor assembled in the right
upper hinge cover.
SSEDA-14 (RS25H5121) ���.indd
13
2013. 11. 28.
�� 11:28