Samsung RS25H5000SR User Manual Ver.00 (English) - Page 19

02 operating USING THE CONTROL PANEL Freezer/Fridge (Temperature adjustment) Press the Freezer or Fridge button until the desired temperature is set. Each time you press the Freezer or Fridge button, temperature indicator will change in below order. • Freezer 0 °F → -1 °F → -2 °F → -3 °F → -4 °F → -5 °F → -6 °F → -7 °F → -8 °F → 5 °F → 4 °F → 3 °F → 2 °F → 1 °F → 0 °F (-18 °C → -19 °C → -20 °C → -21 °C → -22 °C → -23 °C → -15 °C → -16 °C → -17 °C → -18 °C) ❈ In Some Place Starts -19 °C. • Fridge 37 °F → 36 °F → 35 °F → 34 °F → 44 °F → 43 °F → 42 °F → 41 °F → 40 °F → 39 °F → 38 °F → 37 °F (3 °C → 2 °C → 1 °C → 7 °C → 6 °C → 5 °C → 4 °C → 3 °C) Power Freeze This icon will light up when you activate the Power Freeze function. Power Freeze function generates cool air for 50 hours continuously and it makes the inside of the refrigerator cool faster. This function is useful when you make ice more quickly. When you have enough, just press and hold the Freezer/Power Freeze (3 sec) button again for 3 seconds to cancel the Power Freeze function. When you use this function the energy consumption of the refrigerator may increase. Remember to turn it off when you do not need it and return the freezer to your original temperature setting. Energy Saver This icon will light up when you activate the Energy Saver function. The Energy Saver function is automatically set to "ON" when power is supplied to the Refrigerator. If condensation occurs on the doors, turn the Energy Saver function off. In some places, water drop may be generated on the door part. In this case, it is recommended to turn off the Energy saver function. Lighting This icon will light up when you activate the Lighting function. In this case, the dispenser light (under the display) will be on constantly. If you would like the dispenser light to come on only when using the dispenser, turn the Lighting function off by pressing the Lighting button. Control Lock This icon will light up when you activate the Lock function. In this case, you will not be able to use the control panel. If you press and hold the Lighting/Control Lock (3 sec) button again for 3 seconds, you will be able to use the control panel again. Filter Indicator When the filter indicator light changes to red, it is time to change the filter. Typically this happens about every 6 months. The filter Indicator will be Off when you initially insert the water filter. The filter Indicator will be red when you have used your water filter for 6 months. SSEDA-14 (RS25H5121) ���.indd 19 English - 19 2013. 11. 28. �� 11:28