Samsung RS25H5000SR User Manual Ver.00 (English) - Page 15

Making Minor Adjustments, To The Doors - reviews

Get Samsung RS25H5000SR PDF manuals and user guides View all Samsung RS25H5000SR manuals
Add to My Manuals
Save this manual to your list of manuals

Page 15 highlights

01 setting up MAKING MINOR ADJUSTMENTS TO THE DOORS Remember, a level refrigerator is necessary for getting the doors perfectly even. If you need help, review the previous section on levelling the refrigerator. 2. Adjust the height difference between the doors by turning the bolt ( 2 ) clockwise ( ) or counter clockwise ( ). (3) Wrench (2) Bolt When the door of the freezer is higher than the fridge Adjustment part When you turn clockwise ( door will move up. ), the 3. After adjusting the doors, turn the nut ( 1 ) clockwise ( ) until it reaches the lower end of the bolt, then tighten the bolt again with the wrench ( 3 ) to fix the nut in place ( 1 ). Open the doors and adjust them, one at a time, as follows: 1. Unscrew the nut ( 1 ) from the lower hinge until it reaches the upper end of the bolt ( 2 ). (3) Wrench (2) Bolt (1) Nut (3) Wrench (2) Bolt (1) Nut If you do not secure the nut firmly, the bolt may release. When you release the nut ( 1 ), make sure that you use the hex wrench provided ( 3 ) to loosen the bolt 2 in a counter-clockwise ( ) direction. You should then be able to unscrew the nut ( 1 ) with your fingers. SSEDA-14 (RS25H5121) ���.indd 15 English - 15 2013. 11. 28. �� 11:28

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
English - 15
01 SETTING UP
MAKING MINOR ADJUSTMENTS
TO THE DOORS
Remember, a level refrigerator is necessary for
getting the doors perfectly even.
If you need help, review the previous section on
levelling the refrigerator.
Adjustment part
When the door of the freezer is higher than
the fridge
Open the doors and adjust them, one at a time, as
follows:
1. Unscrew the nut ( 
1
 ) from the lower hinge until
it reaches the upper end of the bolt ( 
2
 ).
(1) Nut
(2) Bolt
(3) Wrench
When you release the nut ( 
1 
), make sure
that you use the hex wrench provided ( 
3 
)
to loosen the bolt 2 in a counter-clockwise
( 
 ) direction.
You should then be able to unscrew the
nut ( 
1 
) with your fingers.
2. Adjust the height difference between the doors
by turning the bolt ( 
2
 ) clockwise ( 
 ) or
counter clockwise ( 
 ).
(2) Bolt
(3) Wrench
When you turn clockwise ( 
 ), the
door will move up.
3. After adjusting the doors, turn the nut ( 
1
 )
clockwise ( 
 ) until it reaches the lower
end of the bolt, then tighten the bolt again with
the wrench ( 
3
 ) to fix the nut in place ( 
1
 ).
(2) Bolt
(3) Wrench
(1) Nut
If you do not secure the nut firmly, the bolt
may release.
SSEDA-14 (RS25H5121) ���.indd
15
2013. 11. 28.
�� 11:28