Samsung RS27FDBTNSR User Manual Ver.0.2 (English, French, Spanish) - Page 18

Setting up your side-by-side refrigerator INSTALLATION REQUIREMENTS The installation location you choose must meet the requirements listed in this section. Selecting an installation place • Check the refrigerator's dimensions in the table below before you begin to install it and confirm it can clear all the doors on its way to the installation location. -- If the refrigerator cannot clear the doors, you cannot install it. • Allow sufficient space on the right, left, back, and top for air circulation. -- If there is not enough space, you cannot install the refrigerator. Location of Electrical Receptacle Water Supply Opening (20x20) Enclosure dimensions Model A RS27FDBTNSR/* 48 (1219 mm) B 27.6 (701 mm) (inches) C 83.5 Min, 84.3 Max (2121 mm Min, 2141 mm Max) Front and side dimensions (inches) Model A B C D E 47.6 28.3 82 92.1 85.9 RS27FDBTNSR/* (1209 mm) (720 mm) (2083 mm) (2340 mm) (2182 mm) • Confirm that the floor is flat. -- If the refrigerator is installed on an uneven floor, it will cause vibration and noise. • Confirm that the floor can support the weight of the refrigerator and the food inside (1102.3 lb (500 kg) total). Door 90º Open Door 130º Open Dimensions with doors open (inches) Model A B C D E F 44.5 52.5 40.6 14.4 20.1 46.3 RS27FDBTNSR/* (1129 mm) (1333 mm) (1032 mm) (365 mm) (510 mm) (1176 mm) • Confirm that the refrigerator will be within reach of a grounded wall outlet. • If the refrigerator is a dispenser model, confirm that it will be within easy reach of a water supply and that the humidity in the location is low. -- The refrigerator needs easy access to a water supply for the water and ice dispensers. 18_ setting up DA68-02935A-02.indb 18 13. 8. 28. �� 9:10