Samsung SCC-C4355 User Manual - Page 11
SETUP Switch, Video OUT Port, Power Connection Port, Power Display LED
View all Samsung SCC-C4355 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
English * 2 : For short voltage supply during MENU OFF, executes ONEAF and for more than 2 second * 3 : For more than 2 second long voltage supply, moves to the PRESET 0(HOME) position. 7. 5V OUT Power supply jack for RS-485 JIG. Use within typical DC +5V 100mA. 8. DAY/NIGHT IN This is a function to receive the external DAY/NIGHT signal from the sensor(option) and convert the signal into BW. 9. RS-485 DATAJack for connection to RS-485 DATA- signal line. 10. RS-485 DATA+ Jack for connection to RS-485 DATA+ signal line. SETUP Switch This switch is used to set the function or property. When this switch is pressed for at least 2 seconds, the MAIN MENU appears. (Left/Right) : By pressing this switch left or right, you can move left or right on the menu or change the displayed value. (Up/Down) : B y pressing this switch up or down, you can move up or down on the menu. : When you press this switch in the menu, the selected function is confirmed. To enter a submenu, press this button. Video OUT Port This is connected to the Video Input Port of the monitor and it outputs the Video signals. GND This is a grounding port. Power Connection Port This is connected to the Power cable. Power Display LED When the power is normally connected, the red LED lights. English _11 SC ENGLISH.indd 11 2009-9-22 15:48:3