Samsung SCC-C4355 User Manual - Page 22

setup DAY/NIGHT You can specify a recording mode according to the scene. 1. Select - . 2. Select a screen transition mode according to the illumination, and set options as appropriate.  DAY : Fixed to DAY mode, regardless of the scene. DAY/NIGHT WHITE BAL FOCUS MODE ZOOM SPEED DISPLAY ZOOM DIGITAL ZOOM DETAIL V-SYNC AGC COLOR SUP AUTO ONEAF [2] OFF OFF [2] (INT)--MID  NIGHT : Fixed to NIGHT mode, regardless of the scene. If BURST is set to , the burst signal will be output along with the blackand-white composite video signal.  AUTO : According to the luminance, this will switch DAY to NIGHT mode, or vice AUTO versa. BURST OFF - BURST : If set to , the burst DAYNIGHT signal will not be output in NIGHT mode. BRIGHTNESS DWELL TIME MID 2SEC - DAYNIGHT BRIGHTNESS : Specify NIGHTDAY the brightness level switching from COLOR to BW filter. Adjusting from HIGH to LOW will cause BRIGHTNESS DWELL TIME MASK AREA MID 5SEC 1 2 to switch the filter in a darker screen. - DAYNIGHT DWELL TIME : Time required to determine the filter switch. - NIGHTDAY BRIGHTNESS : Specify the brightness level switching from BW to COLOR filter. Adjusting from HIGH to LOW will cause to switch the filter in a darker screen. - NIGHTDAY DWELL TIME : Time required to determine the filter switch. - MASK AREA : If there exists a bright spot light source in a night scene, you can specify the size and position as needed. This will prevent an error in switching filter, or failure to determine the filter switch in a night scene where a bright spot light source exists. Any excessively bright area in a night scene will be MASKed. MASK AREA  You can specify MASK 1 and 2 simultaneously. 22_ setup SC ENGLISH.indd 22 2009-9-22 15:48:3