Samsung SCC-C4355 User Manual - Page 25

English FOCUS MODE You can select a focus mode according to the angle that you adjusted for camera recording. - AF : This will monitor the screen continuously to focus automatically. If you adjust the focus manually, that will operate the same as in . This will also restore focus after the operation of zoom. - ONEAF : Restores focus after the operation of zoom, and operates the same as in unless the operation of zoom is executed. - MF : You can adjust the focus manually. DAY/NIGHT WHITE BAL FOCUS MODE ZOOM SPEED DISPLAY ZOOM DIGITAL ZOOM DETAIL V-SYNC AGC COLOR SUP AUTO ONEAF [2] OFF X16 [2] INT MID M  While you are working on the following objects, may not work properly. If this is the case, use instead. - Very bright object, or dominant object in a dark scene - Object against the rear side of a moist or dirty glass - A scene where nearby and distant objects co-exist - White wall or single-colored object - Venetian blinds and other horizontally striped objects ZOOM SPEED You can adjust the zoom operation speed. DISPLAY ZOOM You can set to display the zoom status on the screen.  It will disappear in about 3 seconds if the zoom factor has no further change. DIGITAL ZOOM You can set the maximum allowable digital zoom ratio. Digital Zoom will start operation after it is zoomed in to the maximum optical ratio of x43. If you set DIGITAL ZOOM to x16, you can take a shot at up to x688 (43x16). When you set DISPLAY ZOOM as on, you may see zoom value on the screen. DETAIL Used to adjust the vertical and horizontal distinction, respectively. English _25 SC ENGLISH.indd 25 2009-9-22 15:48:3