Samsung SCD5000 User Manual (ENGLISH) - Page 49

Using the CAMCORDER - Basic Recording - mini dv

Page 49 highlights

ENGLISH Using the CAMCORDER - Basic Recording Inserting and Ejecting a Cassette ✤ When inserting a tape or closing the cassette holder, do not apply ✤ excessive force. ✤ This may cause a malfunction. ✤ Do not use any tapes other than Mini DV cassettes. 1. Connect a power source. Slide the TAPE OPEN/EJECT switch and open 1 2 the cassette door. - The cassette holding mechanism rises automatically. 2. Insert a tape into the cassette holder with the tape window facing outward and the protection tab toward the top. 3. Press the area labelled PUSH on the 3 4 cassette holding mechanism until it clicks into place. - The cassette is loaded automatically. 4. Close the cassette door. - Close the door completely until you can hear a "click". Note a. SAVE When you have recorded something that you wish to keep, you can protect it so that it will not be accidentally erased. a. Protecting a Tape : Push the safety tab on the cassette so that the hole is uncovered. b. Removing the protection from a tape : If you no longer wish to keep the recording on the b. REC cassette, push the write-protect tab back so that it q covers the hole. • How to Store a Tape a. Avoid places with magnets or magnetic interference. b. Avoid humidity and dust prone places. c. Keep the tape in an upright position and avoid storing it in direct sunlight. d. Avoid dropping or knocking your tapes. 49

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128

ENGLISH
Using the CAMCORDER - Basic Recording
49
49
Inserting and Ejecting a Cassette
When inserting a tape or closing the cassette holder, do not apply
excessive force.
This may cause a malfunction.
Do not use any tapes other than Mini DV cassettes.
1.
Connect a power source. Slide the TAPE
OPEN/EJECT switch and open
the cassette door.
-
The cassette holding mechanism rises
automatically.
2.
Insert a tape into the cassette holder with
the tape window facing outward and
the protection tab toward the top.
3.
Press the area labelled PUSH on the
cassette holding mechanism until it clicks
into place.
-
The cassette is loaded automatically.
4.
Close the cassette door.
-
Close the door completely until you
can hear a “click”.
Note
When you have recorded something that you wish to
keep, you can protect it so that it will not be accidentally
erased.
a.
Protecting a Tape :
Push the safety tab on the cassette so that the hole
is uncovered.
b.
Removing the protection from a tape :
If you no longer wish to keep the recording on the
cassette, push the write-protect tab back so that it
covers the hole.
How to Store a Tape
a.
Avoid places with magnets or magnetic interference.
b.
Avoid humidity and dust prone places.
c.
Keep the tape in an upright position and avoid storing
it in direct sunlight.
d.
Avoid dropping or knocking your tapes.
a. SAVE
b. REC
1
2
3
4