Samsung SCD5000 User Manual (ENGLISH) - Page 71

ENGLISH Using the CAMCORDER - Advanced Recording Audio Dubbing ✤ The AUDIO DUBBING function only works in PLAYER Mode. ✤ ✤ You can add sound to the original sound on a pre-recorded tape, ✤ recorded in SP mode with 12bit sound. ✤ Use the internal and external microphones or other audio equipment. ✤ ✤ The original sound will not be erased. ✤ Dubbing Sound 1. Set the device to CAMCORDER. s If you want to use an external microphone, connect the microphone to the external MIC input jack on the camcorder. 2. Set the power switch to PLAY mode. s If you want to use an external microphone, connect the microphone to the external MIC input jack on the PLAY camcorder. FADE TAPE MEMORY 3. Press the (PLAY/STILL) button and S.SHOW find the time frame of the scene to BLC OFF be dubbed. REC 4. Press the (PLAY/STILL) button to REV FWD pause the scene. 5. Press the A.DUB button on the Remote Control. s A.DUB will be displayed on the LCD. s The camcorder is in a ready-to-dub state for dubbing. 6. Press the (PLAY/STILL) button to start dubbing. s Press the (STOP) button to stop the dubbing. s s PHOTO STILL ZERO MEM. REW/RPS PLAY FF/FPS A.DUB STOP SELF TIMER SLOW s s Notes s s You can not use the audio dubbing function while playing a write protected video tape. s When you wish to dub using the External A/V input, you must con- s nect the Multi-AV cable to the audio system from which you wish to s record. s You can not dub sound on a pre-recorded tape in LP mode or 16 bit mode. s 71