Samsung SIRTS160 Owners Manual - Page 43
Scan Type, Digital, Off-Air, Cable Type, Scan Channels, Add/Remove Channels, Antenna & Cable,
View all Samsung SIRTS160 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Chapter 3: Setting up and connecting Follow this procedure to scan for channels from an off-air antenna and cable TV service connected to your DIRECTV® High-Definition Receiver. 1 Press the MENU button on your remote control. 2 Highlight the SETUP menu item, and press the OK button. 3 Highlight the Antenna & Cable menu item, and press the OK button. 4 Highlight the Scan Type menu item and press the OK button to display the list of available channel types. The Scan Type list appears allowing you to choose to set your DIRECTV HD Receiver to automatically scan for channels from Digital sources (off-air ATSC broadcasts), Off-Air NTSC sources (standard TV broadcasts), Cable NTSC (standard cable TV services), or all of these. If this is the first time you are setting up this DIRECTV HD Receiver to receive local channels, the All setting is recommended. 5 Highlight the Scan Type option that matches the type of broadcasts you would like to program into your DIRECTV HD Receiver, then press the OK button. 6 Next, set your cable TV type by highlighting the Cable Type menu item and pressing OK. Then highlight the type of cable signal your cable TV service provides (STD, HRC, or IRC), and press the OK button. STD, HRC and IRC are signal formats used by cable TV services. Contact your Cable TV service provider to determine which signal type they use. 7 Highlight the Scan Channels menu item, and press the OK button. The Scan Channels screen appears and the DIRECTV HD Receiver automatically starts looking for all available channels of the type you specified in the Scan Type list. Wait until the scan is complete. 8 If the automatic scan included any channels that you do not intend to watch, you can edit the channel list by using the Add/Remove Channels menu item in the Antenna & Cable menu. 9 If any of the off-air antenna channels appear out-of-tune, you can fine tune them using the Fine Tune Channels item in the Antenna & Cable menu. 10 If you have added digital channels from an off-air antenna, you can check the signal strength for that channel by using the Digital Off-Air Signal Strength menu item in the Antenna & Cable menu. 11 To exit the Menu system press the EXIT button on your remote control. 36