Samsung SMH1816B Installation Instructions - Page 10

Aligning The Wall Plate

Get Samsung SMH1816B PDF manuals and user guides View all Samsung SMH1816B manuals
Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

Step-by-step installation guide D. Aligning the wall plate 2. T th A HHooleleAA CCeenntteerrllininee nnoottcchheess DDrraw a VHeorrtizcoalnLtainleline on tooohfnfe"TWRwoepaaallCllrfaarWoblomiannlelgCtTetehnmetepbrloattteo".m CL HoHroizrioznontatal lLLiinnee AArrea E Hole B Hoorriizzoonntatal Ll iLniene DDrraawwaaHHoroizroiznotanltlainlelionnewoanll wfroamll fbrootmtom of "Rear bWoatltloTmemopflat"eR".ear Wall Template". S CAUTION: Wear gloves to avoid cutting CAUTIfiOngNe:rsWoneasrhagrlpoveedsgetso. avoid cutting fingers on sharp edges. 1. Draw a Horizontal line on the wall at the bottom of the "Rear Wall Template". 2. Drill ⅝˝ holes for toggle bolts in 3 locations (Hole A, Hole B, Hole C) as shown in the illustration above. If the location of a hole lines up with a stud, drill a 3/16˝ hole for a wood screw. You cannot use a toggle bolt to attach the wall plate to a stud. NOTE: DO NOT MOUNT THE PLATE AT THIS TIME. 3. Holes A, B and C are inside area E. If none of these holes line up with a stud, find a stud in area E that lines up with a hole circle in Area E, and then drill a 3/16˝ hole into it for a wood screw. You must have at least one wood screw mounted firmly into a stud to support the weight of the microwave. Set the mounting plate aside. 10 SMH1816_XAA-DE68-03943A-02-EN_120725.indd 10 2012-07-25 �� 7:49:16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
10
Step-by-step installation guide
2.
T
th
A
S
D.
ALIGNING THE WALL PLATE
C
L
CAUTION:
Wear gloves to avoid cutting
Draw a Horizontal line on wall from bottom of “Rear
Wall Template”.
Draw a Horizontal line on
the wall along the bottom
of “Rear Wall Template”.
Horizontal Line
Horizontal Line
Area E
Centerline
notches
Hole A
Hole B
CAUTION
: Wear gloves to avoid cutting fingers
on sharp edges.
1
.
Draw a Horizontal line on the wall at the
bottom of the “Rear Wall Template”.
2
.
Drill ⅝˝ holes for toggle bolts in 3 locations
(Hole A, Hole B, Hole C) as shown in the
illustration above. If the location of a hole
lines up with a stud, drill a
3
/
16
˝ hole for a
wood screw. You cannot use a toggle bolt to
attach the wall plate to a stud.
NOTE: DO NOT MOUNT THE PLATE AT
THIS TIME.
3
.
Holes A, B and C are inside area E. If none
of these holes line up with a stud, find a stud
in area E that lines up with a hole circle in
Area E, and then drill a
3
/
16
˝ hole into it for
a wood screw. You must have at least one
wood screw mounted firmly into a stud to
support the weight of the microwave.
Set
the mounting plate aside.
SMH1816_XAA-DE68-03943A-02-EN_120725.indd
10
2012-07-25
�� 7:49:16