Samsung SMH1816B Installation Instructions - Page 12

Outside Top Exhaust, Vertical Duct, Recirculating Non-vented, Ductless - model

Get Samsung SMH1816B PDF manuals and user guides View all Samsung SMH1816B manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

Step-by-step installation guide A. Outside top exhaust NOTE: You must attach the house duct to the 3. (vertical duct) exhaust adaptor after installation is complete. HHousseeDDuucct t A1. Installation procedure for exhaust adaptor and proper damper operation check C bl The exhaust Adaptor and Damper are of shipped assembled and attached to the filler-upper. pl 1. Slide the exhaust adaptor as shown in the 4. B. Recirculating (non-vented diagram above. ductless) 2. Make sure tape securing the damper is removed and damper pivots easily before you mount the microwave. B1. Adapting the microwave CAUTION: You will need to make adjustments to assure proper alignment with your house exhaust duct after the microwave is installed. blower for recirculation 1. Remove and save the screws that hold the blower plate to the A2. Adjust the exhaust adaptor microwave. After you have installed the microwave, you will need to open the top cabinet and adjust the exhaust adaptor so that you can connect it to the house duct. BBlolowwer Pllaattee DDaammppeerr BBaacckkooff MMicicrroowwavee 2. Lift up the blower plate. Back of Microwave FFoorrFFrroonntt-too--BBaacckk AodrjuSsidtem-teon-St,idSeliAdedjuthstement, ESxlhidaeutshteAEdxahpatuosrt as Needed Adaptor as Needed NOTE: The exhaust adaptor with the damper is not needed for recirculating models. You may want to save them for possible future use. 12 SMH1816_XAA-DE68-03943A-02-EN_120725.indd 12 2012-07-25 �� 7:49:16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
12
Step-by-step installation guide
A.
OUTSIDE TOP EXHAUST
(VERTICAL DUCT)
A1
. INSTALLATION PROCEDURE
FOR EXHAUST ADAPTOR AND
PROPER DAMPER OPERATION
CHECK
The exhaust Adaptor and Damper are
shipped assembled and attached to
the filler-upper.
1
.
Slide the exhaust adaptor as shown in the
diagram above.
2
.
Make sure tape securing the damper is
removed and damper pivots easily before you
mount the microwave.
CAUTION
: You will need to make adjustments to
assure proper alignment with your house exhaust
duct after the microwave is installed.
A2
. ADJUST THE EXHAUST ADAPTOR
After you have installed the microwave, you will
need to open the top cabinet and adjust the exhaust
adaptor so that you can connect it to the house
duct.
For Front-to-Back
Adjustment, Slide the
Exhaust Adaptor as Needed
Blower Plate
Back of
Microwave
Damper
NOTE
: You must attach the house duct to the
exhaust adaptor after installation is complete.
House Duct
B.
RECIRCULATING (NON-VENTED
DUCTLESS)
B1
. ADAPTING THE MICROWAVE
BLOWER FOR RECIRCULATION
2
. Lift up the
blower plate.
1
. Remove and save the screws
that hold the blower plate to the
microwave.
Back of
Microwave
NOTE
: The exhaust adaptor with the damper is not
needed for recirculating models. You may want to
save them for possible future use.
3
.
C
bl
of
pl
4
.
SMH1816_XAA-DE68-03943A-02-EN_120725.indd
12
2012-07-25
�� 7:49:16