Samsung SP-F10M User Manual - Page 42
Clearing Indicator Problems, CLASSIFICA, STATE, MEASURES
View all Samsung SP-F10M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Clearing Indicator Problems CLASSIFICA TION STATE MEASURES Action 1 The cooling fan system is not operating normally. If the symptom remains even after disconnecting and then reconnecting the power cord and turning the projector on again, contact your product provider or our service center. Action 2 The projector has changed to the Cooling mode because the internal temperature of the projector has increased beyond the maintenance limit. If the internal temperature of the projector has increased beyond the maintenance limit, the projector changes to the Cooling mode before turning off automatically. Cooling mode: The velocity of the cooling fan is increased and the LED is automatically switched to mode. Check whether the ventilation hole of the projector is blocked. Check whether the surrounding temperature of the projector is higher than the standard temperature range of the projector. Cool the projector sufficiently and operate it again. Action 3 The internal temperature of the projector has risen higher than the limit, and the projector has turned off automatically. Check whether the ventilation hole of the projector is blocked. Check whether the surrounding temperature of the projector is higher than the standard temperature range of the projector. Cool the projector sufficiently and operate it again. If the same problem occurs continually, contact your product distributor or service center. Action 4 The projector turns off abnormally or is turned on within a short period of time after a shutdown, or an LED operation error has occurred. Turn the power off, wait for a sufficient amount of cooling time and then turn the power on to operate. If the same problem occurs continually, contact a Samsung service center. This Projector uses a cooling fan system to keep the unit from overheating. Operation of the cooling fan may produce noise, This does not affect product performance and is part of normal operation. 3-4 Using