Samsung SP-F10M User Manual - Page 48

<Media Play> : The following functions are activated only when the projector fails - firmware

Get Samsung SP-F10M PDF manuals and user guides View all Samsung SP-F10M manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

MENU Network Reset DESCRIPTION By connecting a LAN cable between the PC and projector, you can use the following supplementary functions on your PC. On your PC, you can check the projector's conditions (LED runtime, operation error,temperature) and remotely control the projector's power On/Off, brightness, and sound On/Off. : - • : Automatically allots the IP address, Subnet mask and Gateway. • : Allows you to manually enter the IP address, Subnet mask and Gateway manually. After pressing the [ ] button to enter values, change the values using the / buttons and move using the / buttons. Once the values are filled in, press the[ ] button. : Allows you to enter the server PC's IP address. To use the network function, must be set to . If the network connection fails, enter the IP address of the server PC under . Using this function, you can reset various settings to the factory default settings. • : Changes the settings to the factory defaults. • : The following functions are activated only when the projector fails toenter the mode due to a mode error. (Only for SP-F10M) Activated only in Mode. • : When the projector is turned off during a firmware update, use this function to continue the update. • - Under normal usage, update by selecting →→ in the menu. • : When the operation suddenly freezes, use this function to restart . • - 3-5 Using

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
3-5
Using
Network
By connecting a LAN cable between the PC and projector, you can use the following supplementary
functions on your PC.
On your PC, you can check the projector's conditions (LED runtime, operation error,temperature) and
remotely control the projector's power On/Off, brightness, and sound On/Off.
<
Network
> : <On> - <Off>
<IP Setting>
•
<Automatic> : Automatically allots the IP address, Subnet mask and Gateway.
•
<Manual> : Allows you to manually enter the IP address, Subnet mask and Gateway manually.
After pressing the [
] button to enter values, change the values using the
/
buttons and
move using the
/
buttons. Once the values are filled in, press the[
] button.
<Server IP Setting> : Allows you to enter the server PC's IP address.
To use the network function, <Network> must be set to <On>.
If the network connection fails, enter the IP address of the server PC under <Server IP Setting>.
Reset
Using this function, you can reset various settings to the factory default settings.
•
<Factory Default> : Changes the settings to the factory defaults.
•
<Media Play> : The following functions are activated only when the projector fails to
enter the
<Media Play> mode due to a <Media Play> mode error. (Only for SP-F10M)
Activated only in <Media Play> Mode.
•
<Recovery Mode>: When the projector is turned off during a firmware update, use this function to
continue the update.
•
<OK> - <Cancel>
Under normal usage, update by selecting <Setup>
→
<Update/Reset>
→
<Firmware
Update> in the <Media Play> menu.
•
<System Reset>: When the <Media Play> operation suddenly freezes, use this function to restart
<Media Play>.
•
<OK> - <Cancel>
MENU
DESCRIPTION