Samsung SPL4225 User Manual (user Manual) (ver.1.0) (English) - Page 33

Using the Key Lock When Key Lock is set to ON, the buttons (SOURCE, MENU, VOLUME, SELECT , MUTE, POWER) on the front of the PDP will not operate. However, these buttons will operate when setting Key Lock OFF . 1 Press the Menu button. Move the joystick up or down to select "SETUP", then press the joystick to enter. Language Color Tone Key Lock SETUP English Normal Off Move Adjust Exit 2 Move the joystick up or down to select "Key Lock", then move the joystick left or right to select "On" or "Off". SETUP Language Color Tone Key Lock English Normal On Move Adjust Exit 3 Press the Menu button to exit. 64 Setting up Your Remote Control This PDP's remote control can operate almost any VCR, cable box, or DVD. After it has been set up properly, your remote control can operate in four different modes :Monitor, VCR, Cable, or DVD. Pressing the corresponding button on the remote control allows you to switch between these modes, and control whichever piece of equipment you choose. Note:The remote control may not be compatible with all DVD Players, VCRs, and Cable boxes. Setting Up the Remote to Operate Your VCR, Cable box, or DVD player 1 Turn off your VCR. (or Cable box, DVD player.) 2 Press the MODE button and make sure that the VCR (or Cable box, DVD) LED is illuminated. S.Sel 3 Press the Set button on your PDP's remote control. 4 Using the number buttons on your remote control, enter three digits of the VCR (or Cable box, DVD) code listed on page 64 of this manual for your brand of VCR (or Cable box, DVD player). Make sure you enter three digits of the code, even if the first digit is a "0". (If more than one code is listed, try the first one.) 5 Press the Power button on the remote control. Your VCR (or Cable box, DVD player) should turn on if your remote is set up correctly. If your VCR (or Cable box, DVD player) does not turn on after set up, repeat steps 2, 3, and 4, but try one of the other codes listed for your brand of VCR (or Cable box, DVD player). If no other codes are listed, try each code, 000 through 089 (or Cable box: 0000 through 077, DVD player: 000 through 008). Notes • When your remote control is in "VCR" mode, the VCR control buttons (Stop, REW, Play/Pause, FF) still operate your VCR. • When your remote control is in "Cable box" or "DVD" mode, the VCR control buttons (Stop, REW, Play/Pause, FF) still operate your VCR. 65