Sanyo FW55C46F-B Owners Manual - Page 15

HDMI-ARC connection HDMI-ARC allows you to use HDMI-CEC to output TV audio directly to a connected audio device, without the need for an additional digital audio cable. HDMI 1 IN only HDMI cable OUT Digital home theater amplifier that supports HDMI-ARC Note(s) ● The HDMI 1 connector is HDMI Audio Return Channel (ARC) compliant. Use it to output digital audio to an HDMI home theater system. ● Be sure that the device is HDMI CEC and ARC compliant and that the TV is connected to the device using an HDMI cable attached to HDMI-ARC connectors. Component analog video connection Component analog video connection offers better picture quality for video devices connected to the unit. If you connect to the unit's component video (Y/Pb/Pr) input jacks, connect analog audio cables to the analog audio (L/R) input jacks. Audio (L/R) cables IN OUT Set-top box or IN Component (Y/Pb/Pr) video cables OUT Blu-ray disc / DVD recorder Note(s) ● The unit accepts 480i, 480p, 720p, 1080i and 1080p of video signals for this connection. 15 .English Composite analog video connection Composite analog video connection offers standard picture quality for video devices connected to the unit. If you connect to the unit's component / composite video (Y/VIDEO) input jack (green), connect audio cables to the audio (L/R) input jacks. When the audio is monaural, then only connect to the audio L input jack. IN OUT Video + Audio(L/R) cables DVD player Note(s) ● With this unit, yellow cable must be connected to Y (green) jack on the component video input jacks. ● Whenever you connect to the composite video input jack (Y/VIDEO), you must disconnect the component video input jacks (Pb and Pr). If you leave those jacks connected, it may cause an unstable picture. Connecting the TV to the internet using an Ethernet cable Internet Ethernet cable LAN Network provisioning equipment Note(s) ● Please purchase shielded Ethernet cables at your local store and use them when you connect to network equipment. ● After connecting an Ethernet cable, set up necessary network settings. Connect to network L p. 39 ● Do not insert any cable other than an Ethernet cable to the Ethernet port to avoid damaging the unit. ● If your telecommunications equipment (modem, etc.) does not have broadband router functions, connect a broadband router. ● If your telecommunications equipment (modem, etc.) has broadband router functions but there is no vacant port, then add a hub. ● For a broadband router, use a router which supports 10BASE-T / 100BASE-TX. ● Do not connect your PC directly to the Ethernet port of this unit. Continued on next page.