Sanyo FW55C46F-B Owners Manual - Page 41

Wireless network setting This menu is displayed only when you set Wireless in Network selection. In order to use a wireless network, you must set up a connection to the AP (e.g. wireless router). 2 Use H I to select Wireless network setting, then press OK. Auto Search for wireless networks automatically and select the SSID from the list. 3 Use H I to select Auto, then press OK. 4 The list of wireless networks will be displayed. Use H I to select the appropriate the SSID, then press OK. Auto Manually enter your SSID Router 1 Router 2 Router 3 Router 4 Simple Connect Pin code Manual 41 .English Manually enter your SSID Set up the connection to the AP (e.g. wireless router) manually by entering the SSID. 3 Use H I to select Manually enter your SSID, then press OK. ● AP (e.g. wireless router) SSID entry screen will appear. Enter the SSID using H I J K, then press OK. 4 Use H I to select the authentication setting of the selected wireless network. ● For a wireless network with authentication setting, select the authentication setting, according to the security type of the wireless network. Auto XXXXXXXXXXXXXX Manually enter your SSID None WEP Others ● If you select the SSID with , WEP*2 / others Key entry screen will appear. Enter the WEP*2 / others key of the selected wireless network using H I J K, then press OK. ● If you select the SSID has an easy connect, the easy connect setting screen will appear. Use H I J K to select a setting, then press OK. Simple Connect Select this setting if your router has an easy connect button. Start scanning for wireless networks on the TV after pressing the easy connect button on your router. If connection test fails, try Simple Connect again.*1 If it fails then refer to the router's manual for more details. Pin code Select this setting if your router has an easy connect feature but does not have an easy connect button. Enter the 8-digit PIN code shown on your TV in the Router settings menu via PC before Connect is selected. Manual If your wireless network with authentication setting (WEP*2, others), WEP*2 / others Key entry screen will appear. Enter the WEP*2 / others key of the selected wireless network using H I J K, then press OK. *1 Simple Connect cannot be used when the security protocol is set to WEP. Change the Access Point's security mode from WEP to others (recommended). *2 WEP is not recommended to be used due to its major security flaws. Change the security protocol on the wireless router to others (recommended) mode. Confirmation message will appear. Select OK to complete the settings. Note(s) ● For a wireless network with authentication setting, key icon appears to the right hand of the SSID. ● Signal icon shows the strength of the signal. ● WEP*2 / others key appears as asterisks on the confirmation screen. ● The wireless LAN supports following specifications. - Wireless standards: IEEE 802.11 b/g/n - Frequency spectrum: 2.4GHz - Security protocol: WEP*2 / others None WEP Others Set the authentication setting to None. Set the authentication setting to WEP*. Set the authentication setting to Others. ● For a wireless network without authentication setting, select None. ● If you select WEP* or Others, WEP* / others Key entry screen will appear. Enter the WEP* / others key of the selected wireless network using H I J K, then press OK. ● Confirmation message will appear. Select Yes to complete the settings. * WEP is not recommended to be used due to its major security flaws. Change the security protocol on the wireless router to others (recommended) mode. Continued on next page.