Sanyo FW55C46F-B Owners Manual - Page 33

Preferences You can set the unit to reduce the power consumption or adjust the backlight brightness in Location setting. fun-Link (HDMI CEC) allows you to operate your connected HDMI-CEC device. Setting your location to home Choosing Home gives you full flexibility to change predefined settings for picture and sound. 1 Use H I to select Preferences, then press OK. 2 Use H I to select Location, then press OK. Language Location Preferences fun-Link (HDMI CEC) Restore default settings TV placement E-sticker Retail Home 3 Use H I to select Home, then press OK. Retail The unit will be set up with predefined settings for retail displays. In this setting, you can set the backlight brighter. Home The unit is set to maximize the energy efficiency for home setting and it can be adjusted through a choice of picture and sound quality selections according to your preference. Note(s) ● You must set Home in the menu. Otherwise, personalized picture and sound settings will not be memorized after the unit goes into standby mode. TV placement To apply the best settings for your TV, select wall mount or stand mount. 1 Use H I to select Preferences, then press OK. 2 Use H I to select TV placement, then press OK. 3 Use H I to select Wall mounted or On a TV stand, then press OK. E-sticker When you set Location to Retail, E-sticker (Electronic Sticker) is displayed. E-sticker can be turned off using procedure below. 1 Use H I to select Preferences, then press OK. 2 Use H I to select E-sticker, then press OK. 3 Use H I to select Off, then press OK. 33 .English Use fun-Link Your TV supports fun-Link, which enables one-touch play and one-touch standby between fun-Link-compliant devices. Compliant devices must be connected via an HDMI connector. One-touch play When you connect your TV to devices that support one-touch play, you can control your TV and the devices with one remote control. For example, when you press K (Play) on your DVD remote control, your TV automatically switches to the correct channel to show the DVD content. One-touch standby When you connect your TV to devices that support standby, you can use your TV remote control to put your TV and all connected HDMI devices in standby mode. You can perform one-touch standby using the remote control from any of the connected HDMI devices. System audio control When you connect your TV to HDMI CEC compliant devices, your TV can switch automatically to play audio from the connected device. To use one-touch audio, you must map the audio input from the connected device to your TV. You can use the remote control from the connected device to adjust the volume. Device control Device control allows you to control fun-Link-compliant devices using your TV remote control. HDMI-ARC (Audio Return Channel) (HDMI 1 only) HDMI-ARC allows you to use fun-Link to output TV audio directly to a connected audio device, without the need for an additional digital audio cable. Be sure that the device is HDMI CEC and ARC compliant, and that the TV is connected to the device using an HDMI cable attached to both HDMI-ARC connectors. Note(s) ● SANYO does not guarantee 100% interoperability with all HDMI CEC devices. ● The fun-Link-compliant device must be switched on and selected as the source. fun-Link (HDMI CEC) This function allows you to operate the linked functions between our brand devices with a fun-Link feature and this unit connecting through an HDMI cable. You must connect this unit to our brand fun-Link devices and be sure its fun-Link (HDMI CEC) setting is also set to on. 1 Use H I to select Preferences, then press OK. 2 Use H I to select fun-Link (HDMI CEC), then press OK. 3 Use H I J K to select the item you want to adjust, then press OK. Location fun-Link control Off fun-Link (HDMI CEC) Auto TV On On TV placement Device control E-sticker HDMI-ARC Continued on next page.