Sanyo FW55C46F-B Owners Manual - Page 16

Connecting the TV to the internet using a wireless LAN Internet Network provisioning equipment LAN Ethernet cable Broadband router WLAN Note(s) ● After you make the wireless connection, set up the necessary network settings. Connect to network L p. 39 ● Use a wireless LAN Access Point (AP) (e.g. broadband wireless router) which supports IEEE 802.11 b/g/n. (n is recommended for stable operation of the wireless network.) ● This unit does not support Ad-hoc mode. ● Other radio devices or obstacles may cause interference to the wireless network connection. Digital audio output connection If you connect this unit to an external digital audio device, you can enjoy multi-channel audio like 5.1ch digital broadcasting sound. Use a digital audio optical cable to connect the unit to external digital audio devices. OUT Digital audio optical cable IN Digital home theater amplifier 16 .English PC connection HDMI connection This unit can be connected to your PC that has an HDMI terminal. Use an HDMI cable for this digital connection. IN OUT HDMI cable PC HDMI-DVI connection This unit can be connected to your PC that has a DVI terminal. Use an HDMI-DVI conversion cable for this video digital connection and it requires stereo mini 3.5mm plug audio cable for analog audio signal as well. HDMI-DVI conversion cable IN OUT PC OUT IN Stereo mini 3.5 mm plug audio cable VGA connection This unit is equipped with a PC input jack. If you connect this unit to your PC, you can use this unit as a PC monitor. Use a VGA cable for this video connection and it requires a stereo mini 3.5mm plug audio cable for analog audio signal as well. PC VGA cable IN OUT IN Stereo mini 3.5 mm plug audio cable OUT The following PC-input video signals can be displayed: Format Resolution Refresh rate VGA 640 x 480 SVGA 800 x 600 XGA 1,024 x 768 60Hz WXGA 1,280 x 768 1,360 x 768 FHD 1,920 x 1,080 24/30/60Hz Other formats or non-standard signals will not be displayed correctly. Continued on next page.