Sanyo PLC-XP100L Owners Manual - Page 29
NO SHOW button, FILTER button, KEYSTONE button, POINTER, button, P-TIMER, FILTER, NO SHOW, KEYSTONE - filters
UPC - 086483068263
View all Sanyo PLC-XP100L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Basic Operation FILTER button Press and hold the FILTER button for more than five seconds to operate electrically operated filter to replace the filter. Remote Control NO SHOW button Press the NO SHOW button on the remote control to black out the image. To restore to normal, press the NO SHOW button again or press any other button. MOUSE POINTER button "No show" disappears after 4 seconds. MOUSE POINTER button Move the pointer on the screen with this button. POINTER button Press POINTER button on the remote control to display the Pointer on the screen. P-TIMER button FILTER button POINTER button KEYSTONE button NO SHOW button ✔Note: • See the previous page for the description of other buttons. P-TIMER button Press the P-TIMER button on the remote control. The Timer display "00 : 00" appears on the screen and starts to count time (00 : 00-59 : 59). To stop the P-TIMER, press the P-TIMER button. To cancel the P-TIMER, press the P-TIMER button again. P-Timer display KEYSTONE button Press the KEYSTONE button on the remote control. The "Keystone" appears on the screen. Use the Point ed7 8 buttons to correct keystone distortion. The keystone adjustment can be stored (pp.40, 44). • The white arrows indicate that there is no correction. • A red arrow indicates the direction of correction. • An arrow disappears at the maximum correction. • If you press the KEYSTONE button on the remote control again while the Keystone dialog box is being displayed, the keystone adjustment will be canceled. • "Keystone" disappears after 10 seconds. Reduce the upper width with Point e button. Reduce the lower width with Point d button. Reduce the left part with Point 7 button. Reduce the right part with Point 8 button. 29