Sanyo PLC-XP100L Owners Manual - Page 46

Picture Image COLOR SELECTION MODE (continued) COLOR M. Return to the COLOR MANAGEMENT POINTER. (If you press the MENU button on the side control or the remote control, it returns to the COLOR MANAGEMENT POINTER and you will need to reselect and readjust the color.) MENU Return to the IMAGE ADJUST Menu. Any settings that have been changed will not be stored. To store the changed settings, be sure to select "LIST" and go to the COLOR MANAGEMENT LIST. 4 In the COLOR MANAGEMENT LIST, the adjusted color data are checkmarked. You can decide whether or not to apply the adjusted color data in the list to the projected image (see below). LIST MODE Clear the check mark if you do not want to apply the adjusted color data; select the check mark and then press the SELECT button. The check mark disappears. COLOR PALETTE Return to the COLOR SELECTION mode so that you can readjust the setting for the color in that line. (This option is not available if the check mark is cleared.) DEL Select the DEL box if you want to delete the adjusted data. Press the SELECT button and a confirmation box appears and then select [Yes] ALL DEL Delete all the data in the list. Press the SELECT button and a confirmation box appears and then select [Yes]. MENU The same function as stated above. COLOR M. The same function as stated above. Auto picture control Use the Point 7 8 buttons to select the desired Auto picture control position (Off, L1 or L2). Off . . . . . Auto picture control OFF position. L1 . . . . . Auto picture control LEVEL 1 position. L2 . . . . . Auto picture control LEVEL 2 position. Color temp. Use the Point 7 8 buttons to select the desired Color temp. level (High, Mid, Low, or XLow). COLOR SELECTION MODE Level and phase adjustment palette. Gamma adjustment palette. LIST COLOR M. MENU LIST MODE COLOR PALETTE DEL ALL DEL MENU COLOR M. 46