Sanyo VPC-SH1 VPC-SH1 Owners Manual English - Page 52

Does it seem to take a long time to save images?

Page 52 highlights

SHOOTING SINGLE SHOTS HINT Adjusting the monitor brightness i While the Recording Screen is active, you can quickly access the screen for adjusting the brightness of the monitor by pressing the MENU button for at least 1 second. What is the camera focusing on? i A target mark & on the monitor shows the area the camera is Target mark 4M-S focusing on. i The camera automatically determines the correct focus by measuring from 9 different focus points within the shooting area. If the target mark is at a position that is different from the point you wish to F3.5 1/2 focus on, you can refocus, for example, by changing the shooting angle. Camera shake icon Shutter speed i The large target mark appears when the camera focuses on a wide area Aperture in the center of the screen. The shutter speed and aperture are displayed (NORMAL mode) i The shutter speed and aperture settings are shown on the Recording Screen. You can use them as a reference when shooting. If the camera shake icon > appears... (NORMAL mode) i During still image shooting, if the shutter speed is slow and the possibility that the image may be blurred due to camera shake becomes high, the camera shake icon may appear on the monitor. In this case, use a tripod to stabilize the camera when shooting, or set the flash operation mode to automatic. i When shooting with the scene select function set to the fireworks + mode, the camera shake icon always appears, but this is normal. Does it seem to take a long time to save images? i When shooting in dimly lit conditions, it may take some time to save the data to the card. 31 English

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96

31
English
SHOOTING SINGLE SHOTS
HINT
Adjusting the monitor brightness
i
While the Recording Screen is active, you can quickly access the screen
for adjusting the brightness of the monitor by pressing the MENU button for
at least 1 second.
What is the camera focusing on?
i
A target mark
&
on the monitor
shows the area the camera is
focusing on.
i
The camera automatically
determines the correct focus by
measuring from 9 different focus
points within the shooting area. If the
target mark is at a position that is
different from the point you wish to
focus on, you can refocus, for
example, by changing the shooting
angle.
i
The large target mark appears when
the camera focuses on a wide area
in the center of the screen.
The shutter speed and aperture are displayed (NORMAL mode)
i
The shutter speed and aperture settings are shown on the Recording
Screen. You can use them as a reference when shooting.
If the camera shake icon
>
appears... (NORMAL mode)
i
During still image shooting, if the shutter speed is slow and the possibility
that the image may be blurred due to camera shake becomes high, the
camera shake icon may appear on the monitor. In this case, use a tripod to
stabilize the camera when shooting, or set the flash operation mode to
automatic.
i
When shooting with the scene select function set to the fireworks
+
mode, the camera shake icon always appears, but this is normal.
Does it seem to take a long time to save images?
i
When shooting in dimly lit conditions, it may take some time to save the
data to the card.
4
M
-S
F3.5
1/2
Shutter speed
Aperture
Target mark
Camera shake icon