Schwinn 450 Elliptical Assembly and Owner's Manual - Page 22
Leveling the Machine - assembly
View all Schwinn 450 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Leveling the Machine The machine needs to be leveled if your workout area is uneven or if the Rail Assembly is slightly off the floor. To adjust: 1. Place the machine in your workout area. 2. Safely stand on the back of the Rail Assembly for approximately 20 seconds. 3. Step off the machine. 4. Loosen the locking wing nuts and adjust the levelers until they all contact the floor. Do not adjust the levelers to such a height that they detach or unscrew from the machine. Injury to you or damage to the machine can occur. 5. Adjust until the machine is level. Tighten the locking wing nuts. Make sure the machine is level and stable before you exercise. 22
22
Leveling the Machine
The machine needs to be leveled if your workout area is uneven or if the Rail Assembly is slightly off
the floor. To adjust:
1.
Place the machine in your workout area.
2.
Safely stand on the back of the Rail Assembly for approximately 20 seconds.
3.
Step off the machine.
4.
Loosen the locking wing nuts and adjust the levelers until they all contact the floor.
Do not adjust the levelers to such a height that they detach or unscrew from the
machine. Injury to you or damage to the machine can occur.
5.
Adjust until the machine is level. Tighten the locking wing nuts.
Make sure the machine is level and stable before you exercise.