Schwinn 450 Elliptical Assembly and Owner's Manual - Page 51
Arms and Handlebar Arms.
View all Schwinn 450 Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Fan will not turn on or will not turn off Fan will not turn on, but Console operates Unit rocks/does not sit level Foot pedals loose/unit difficult to operate Clicking sound when operating Check data cable integrity Check data cable connections/orientation Reset machine Check for blockage of fan Check leveler adjustment Check surface under unit Hardware Check pedal arm to crank arm connection All wires in cable should be intact. If any are cut or crimped, replace cable. Be sure cable is connected securely and oriented properly. Small latch on connector should line up and snap into place. Unplug unit from electrical outlet for 3 minutes. Reconnect to outlet. Unplug unit from electrical outlet for 5 minutes. Remove material from fan. If necessary, detach the Console to help with removal. Replace the Console if unable to remove blockage. Adjust levelers until machine is level. Adjustment may not be able to compensate for extremely uneven surfaces. Move machine to level area. Tightly secure all hardware on the Pedal Arms and Handlebar Arms. Remove pedal arms and reattach. 51