Schwinn 450 Elliptical Assembly and Owner's Manual - Page 48

Troubleshooting Condition/Problem No display/partial display/ unit will not turn on Unit operates but Contact HR not displayed Things to Check Check electrical (wall) outlet Check connection at front of unit Check data cable integrity Check data cable connections/orientation Check console display for damage Console Display HR cable connection at Console HR cable box connection Sensor grip Solution Make sure unit is plugged into a functioning wall outlet. Connection should be secure and undamaged. Replace adapter or connection at unit if either are damaged. All wires in cable should be intact. If any are visibly crimped or cut, replace cable. Be sure cable is connected securely and oriented properly. Small latch on connector should line up and snap into place. Check for visual sign that console display is cracked or otherwise damaged. Replace Console if damaged. If Console only has partial display and all connections are fine, replace the Console. If the above steps do not resolve the problem, contact Customer Care for further assistance. Be sure cable is connected securely to Console. Be sure cables from handlebars and cable to Console are secure and undamaged. Be sure hands are centered on HR sensors. Hands must be kept still with relatively equal pressure applied to each side. 48