Seiko 6A32 Technical Guide - Page 18

TECHNICAL GUIDE HOW TO INPUT THE CALENDAR DATA (1) Method of operation Illustration 1 Set the inner frame. Cal. 6A32A Notes and tips When fixing in the inner frame, take care so as not to touch the circuit pattern. 2 Reset the IC (Integrated circuit.) AC pattern • Keep the positive terminal in contact with the AC pattern of the circuit for 4 seconds or longer to reset the IC. * Make sure the crown is at the original position. Positive terminal 3 Close the back lid. 4 Initial position adjustment for the calendar (1) (Set the second hand pointing to the 12 o'clock position.) 1. Pull out the crown to the first click position and hold down the button for 2 seconds or longer. * The second hand will rapidly turn clockwise and stop and the date dial will move back and forth, and then stop. * Keep the crown at the first click position from this point onward. 2. After confirming that the second hand and the date dial have been stopped, turn the crown to set the second hand pointing to the 12 o'clock position. "Initial position of the second hand " * Make sure that the second hand movement is interlocked with the rotation of the crown: the second hand moves forward by turning the crown clockwise, while it moves backward by turning the crown counterclockwise. 9 10 11 9 10 11 18 Make sure that the gasket is not pinched or rolled. Rotating the crown clockwise will turn the second hand clockwise. Rotating the crown counterclockwise will turn the second hand counterclockwise. ● In the following operations in each mode, never rotate the crown while the second hand and the date dial are moving, as this may cause an IC malfunction. * In a case that an IC malfunction occurs, reset the IC and follow the same procedures again for restoration. * If the watch is left unoperated in this mode, the setting mode will be automatically cancelled and the watch will return to the normal mode within 2 to 3 minutes.