Sharp 37D7U LC-26D7U LC-32D7U LC-37D7U Operation Manual - Page 38

Watching TV Connecting Digital Cable Module Digital Cable Module is called CableCARD™. By attaching the CableCARD, you can receive various digital services provided by your Cable Company. To obtain and use a CableCARD you need to first submit an application. Please contact your cable company to discuss receiving an application. NOTE • If your cable company does not have CableCARD available, you must connect to the cable-TV set-top box via component video or DVI in order to receive HDTV programs. (See page 55.) ■ When you change your address (See page 89.) ■ About EAS (Emergency Alert System) (See page 89.) 2 Press c/d to select "Digital Setup", a/b to select "CableCARD Menu", a/b to select 1 Turn on the power of the TV. "Pairing Information", and then press ENTER. 2 Connect the antenna cable to DIGITAL CABLE IN. 3 Insert the CableCARD (upper side facing right) into the CableCARD slot. • A message will appear on the screen. (It might take a couple of minutes before the message appears.) Call the number on the screen and tell the operator the CableCARD ID and Host ID numbers displayed on the screen. CableCARD(tm) Pairing Status In order to start cable service for this device, please contact your cable provider 1-888-555-2222 CableCARD™ ID: 7-561-034-449-009 Host ID: 0-100-331-784-018 NOTE • Do not insert any PCMCIA card other than CableCARD into the CableCARD slot. • Please do not pull the AC cord out while the CableCARD is inserted. • After inserting the CableCARD, it may take several minutes before video output from the selected channel appears on screen. ■ If the above procedure does not work, please follow the following steps instead. 1 Press MENU and the MENU screen displays. Conditional Access Pairing Information Diagnostic Screen ECM • The words "Pairing Information" may be replaced by a different expression depending on the manufacturer of the CableCARD. 3 A message will appear on the screen. Call the number on the screen and tell the operator the CableCARD ID and Host ID numbers displayed on the screen. CableCARD Dialog CableCARD(tm) Pairing Status In order to start cable service for this device, please contact your cable provider 1-888-555-2222 CableCARD(tm) ID: 7-561-034-449-009 Host ID: 0-100-331-784-018 • If there is a white triangle at the right side of the screen, the screen is not showing the entire message. Press a/b on your remote control to display the rest of the message. • When there is a "LINK" button on the screen, there is a link to the next page. Press ENTER to go to the next page. CableCARD(tm) Diagnostic Information Power: ON In band: O.K. Out of band: O.K. Video: O.K. Audio: O.K. LINK Removing CableCARD 1 Turn on the power of the TV. 2 Check that the CableCARD upgrade screen is not displayed. If it is displayed, wait until it disappears. 3 Remove the CableCARD. Disconnecting the cable antenna 1 Turn on the power of the TV. 2 Check that the CableCARD upgrade screen is not displayed. If it is displayed, wait until it disappears. 3 Disconnect the cable antenna. 37