Sharp 37D7U LC-26D7U LC-32D7U LC-37D7U Operation Manual - Page 57
Connecting HDMI equipment, Displaying an image from HDMI equipment
UPC - 074000362727
View all Sharp 37D7U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Using external equipment Connecting HDMI equipment Please use the INPUT 4 terminal when connecting HDMI equipment. HDMI cable (Commercially available) HDMI equipment Displaying an image from HDMI equipment 1 To watch an HDMI equipment image, select "INPUT4" from "INPUT SOURCE" menu using INPUT on the remote control unit or on the TV. (See page 66.) INPUT SOURCE 5 Press a/b to select the desired item and press ENTER. 6 Press a/b/c/d to select the desired setting and press ENTER. TV CableBox [TV] HDMI Setup items Selectable items Description INPUT1 INPUT2 Signal Type Auto/RGB/YCbCr 4:4:4/YCbCr 4:2:2 Select the signal type from an HDMI terminal. Unless the image quality looks obviously poor, select Auto. INPUT3 Color Auto/ITU601/ Select the internal color INPUT4 Matrix ITU709 space conversion method when an RGB signal is INPUT5 input. Normally, select Auto. i.LINK Dynamic Standard/ Select the signal amplitude Range Out of Standard range. Normally, select Standard. 2 Press MENU and the MENU screen displays. Auto View Enable/Disable Set whether or not to use VIEW MODE based on 3 Press c/d to select "Option". signal recognition, including an HDMI signal. NOTE 4 Press a/b to select "HDMI Setup", and then • Refer to your external equipment operation manual for press ENTER. the signal type. MENU [Option ... HDMI Setup] Option Audio Only Digital Noise Reduction HDMI Setup [Low] 56