Sharp 37D7U LC-26D7U LC-32D7U LC-37D7U Operation Manual - Page 91

Appendix Removing the stand Before detaching (or attaching) stand, unplug the AC cord from the AC input terminal. CAUTION • Do not remove the stand from the TV unless using an optional wall mount bracket to mount it. Before attaching/detaching stand • Before performing work make sure to turn off the TV. • Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged. 1 2 3 (LC-37/32D7U) (LC-26D7U) Unfasten the screw used to Unfasten the four screws secure the bracket in place. used to secure the stand in place. Detach the stand from the TV. (Hold the stand so it will not drop from the edge of the base area.) Detach the stand from the TV. (Hold the stand so it will not drop from the edge of the base area.) CAUTION • Do not remove the stand from the TV unless using an optional bracket to mount it. NOTE • To attach the stand, perform the above steps in reverse order. Setting the TV on the wall CAUTION • Installing the Liquid Crystal Television requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury. Using an optional bracket to mount the TV • You can ask a qualified service professional about using an optional AN-37AG2 bracket to mount the TV to the wall. The AN-37AG2 is compatible with the LC-37D7U and LC-32D7U only. • Carefully read the instructions that come with the bracket before beginning work. Hanging on the wall AN-37AG2 wall mount bracket. (See the bracket instructions for details.) About setting the TV angle Angle of TV LC-37D7U 5˚ LC-32D7U 10˚ Vertical mounting 90 Angular mounting