Sharp 37D7U LC-26D7U LC-32D7U LC-37D7U Operation Manual - Page 93
Troubleshooting-TV Guide On Screen - review
UPC - 074000362727
View all Sharp 37D7U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Appendix Troubleshooting-TV Guide On Screen Problem Possible Solution • LISTINGS disappeared after a • You should begin to receive listings again within 24 hours. power failure. • Some channel numbers in the TV • You can correct them using "Changing channel display" under SETUP. Guide On Screen are incorrect. • You have not received any local program listings. Listings usually appear within 24 hours after a successful Setup. • Check the connections between the TV, cable, antenna, and the G-LINK cable if using a cable box. • Verify Setup information under "Changing system settings". • Make sure the cable box is on, if applicable. • Review step 4 and step 5 of "Basic Initial Setup" on page 21. • A program you set to record did not record. • Make sure your recorder is turned off before the recording begins. • Make sure there is free space available for recording on the tape or recording device. • Check the SCHEDULE menu and verify that the program is listed, before recording begins. • Check the placement of the G-LINK cable in front of your recorder. • The TV did not tune to a program • Check the SCHEDULE menu and verify that the program is listed. you scheduled with the reminder • If you have a cable box, check the G-LINK cable. feature. • You set a program to "auto tune TV" and it did not. • Check the SCHEDULE menu and verify that the program is listed as a Reminder. • Highlight the program under LISTINGS and do the following: - Press MENU on the remote control. - Use b to highlight "edit reminder", and press ENTER. - Verify the "auto tune TV" option reads "yes". • The TV must be on at the scheduled time for "auto tune TV". • You set a program with the "power on TV" option and it did not. • Check the SCHEDULE menu and verify that the program is listed as a Reminder. • Highlight the program under LISTINGS and do the following: - Press MENU on the remote control. - Use b to highlight "edit reminder", and press ENTER. - Verify that the "power on TV" option reads "yes". • The TV must be off at the scheduled time for "power on TV". 92